Delivery Time:90 DAYS
Certification:CE

W75Guardrail Forming Machine Line A

Description:

1. Rolled thickness:2.0mm-3.5mm cold rolled stee,,hot rolled steel or galvanized steel G350Mpa

2. main motor power: 45kw with speed reducer ,made in China

3. way of drive: joint coupling drive( gearbox for each roller station see picture below)

4. main shaft dia: ￠100mm   material: 40Cr fine processment

5. roller material: GCR15 quenched 58°-62°,chromed

6. roll station:13stations plus 7 rolls leveling

7. Working speed:5m--12m/min(not including punching)

8. Transducer: Panasonic /Yaskawa made in Japan. 380V 50HZ

9. Way of control: PLC,Panasonic

10. Computer operating panel:MSG touching screen made in Taiwan

Flowchart:

Decoiling — Feeding — leveling ----  Punching — roll forming ---- hydraulic     cut to length — product packing manual

Applications:

Expressway guardrail

Barrier rails

Guardrail beams

Specifications:

The profile

The structure of equipment

 1, the place putting material

Single unrolling machine, one side can put material Coil weight (Max):7000kg Coil dia (Max):1600mm Coil Width(Max.):500mm Hydraulic power: 4KW Diameter of oil pump:120mm  working pressure: 10mpa  

2, feeding, leveling

feed into unit oriented wheel(can right and left adjust) into feeding roller, dia is  ￠180mm,material 45# steel, quenched 48°-52°, chromed leveling is three roller above and four roller below, quenched and chromed

3, punching (can right and left adjust)

using hydraulic punching oil cylinder dia: ￠140mm working pressure:20mpa mould material: Cr12  quenched 58°-62° hydraulic power:7.5kw size: 1.5m long*1.1m wide*1.2m high

4,roll forming

main motor power: 37kw Decelerating motor: BWD14-43-37kw, made in Shanghai or

Changzhou

drive: 120*500 copplins driving, main shaft dia: ￠100mm   material: 45﹟forge steel roller material: GCR15 quenched 58°-62°,chromed roll station:15stations Timing by transducer:5m--12m/min(not including punching) Transducer: Panasonic made in Japan. 380V 50HZ Computer: PLC Computer operating panel: touching screen

5, cutting

hydraulic cut knife material: Cr12,quenched 58°-62° oil cylinder dia:200mm working pressure:25mpa working journey: 80mm

6, the Outside size:

18m long*2.2m wide*1.5m high

7, Run out table

Jointed by 60mm*40mm tube (can be adjusted to up and down) Gliding wheel fixed on the shelves size:1.5mlong*0.8mwide*0.6-1mhigh(can be adjusted)

The parts of machine

hydraulic passive Uncoiled,  Forming Machine ( feeding, leveler, roll mill, cutting,  punching, PLC computer, Hydraulic station, cutting), and simple run out shelves 3pcs, packing list 1 pcs.

Competitive Advantage:

Good quality and reasonable price