Delivery Time:1 - 2 weeks
Certification:CE Certification

                    Cable type intelligent radar level transmitter with high accuracy

Quick Detail:

0.25%,0.50% accuracy -40ºC to 100ºC operating temperature 100% stainless steel 316L isolation. Wide variety of pressure ranges and electrical outputs Low cost and compact package stainless steel with rigid and robust construction. The protection cap with a small hole The exquisite sealing technology a waterproof cable with vent hose

Description:

Guided wave radar level meter are a kind of measuring instrument based on the time travel , radar wave are travelling as light speed , the travel time can be transformed into level signal by the electronic parts . The detector can send the HF pulse and spread along cable , when the pulse meet the level surface , it will be reflected and received by the receptor inside the instruments , then the receptor will transform the distance signal into level signal.

Input

The reflected impulse signal is transmitted along the proble to the circuit of the gauge . The microwave processor processes this signal , and recognizes the wave echo of the microwave impulse from the material surface . The correct wave echo signal is recognized by the intelligent softwave , the distance from the material surface D is proportional to the flying time of the impulse T:

D=C×T/2

C is the velocity of light .

As the distance of the empty tank E is known , so

L=E-D

Output

By inputting empty tank height E(zero point) ,full tank height (full measuring range) and some application parameter are set .With the application parameters , the transmitter will automatically adapt itself to the measuring enviroment, corresponding 4-20mA output .

Measuring Distance

The following table indicates the relations between mediums and measuring distance

Applications:

Used for grain bin,oil/ fuel/water/powder tank, liquid

Specifications:

Type	Cable type Radar Level transmitters
Probe type	cable type
application	liquid,slurry,and solid
asuring range	0 - 30m
process fitting	G1 - 1/2 flange DN50 , DN80 , DN100 , DN150
Maerial of the detecting element	cable type stainless steel 316 L
Process temperature	\"-40…+80℃\"
Process pressure	\"-1.0...40bar\"
Accuracy <	0.1%
Frequency range	100MHZ-1.8GHZ
Ex-proof and protection level	EXiaIICT6/IP68
Signal output	Two wire/four wire/RS485 4...20mA/HART

Competitive Advantage:

1.Competitive Price Offering
2.Special Time Delay Method
3.Stable And Precise Measurement In Very Short Time