Delivery Time:15 working days after received your payment
Certification:SGS

Claw Shape SS Screen Strainer 4,000 LPH Anthracite Filter Tank For Suspended Particles
 
 Features:

Anthracite filter is especially selected minerals from the deep well, with the highest percentage of carbon. Anthracite filter using artificial classification, can reduce extraneous minerals and lower ash content. By filtering and washing. Anthracite filter is especially selected minerals from the deep well, with the highest percentage of carbon. Water filter using artificial classification, can reduce extraneous minerals and lower ash content. Water filter through the filtering and washing, ensure the suitable water filtration with. The ability to maintain a good solid particles, so the anthracite can reliably improve the ability to remove suspended particles. In addition, its low coefficient of uniformity, to help speed up the flow.

Colour	Black
Carbon content	85
SG	1.65 + 0.05
Alkali water soluble	0.7 + 0.3
Acid soluble	0.7 + 0.3
Water soluble acid	≤2%
Hardness	Mohs hardness, 3.0 to 3.5 degrees
Density	52 pounds per cubic foot
Particle size	0.60 - 62.00 mm

Effect of quality anthracite filter media plays in the filtering process, directly affect the filtration of water, so the choice of this filter must meet the following requirements:

High mechanical strength, breakage and wear rate and should not be greater than 3% (percentage by weight).

The chemical properties of stability, no toxic substances. In general acidic, alkaline, neutral water insoluble. Products manufactured by the China water treatment media supervision and test center measured: hydrochloric acid soluble rate is 0.68% (ministerial standard is 3.5) can achieve good purifying effect in all kinds of water.

The particle size distribution is reasonable, specific surface area. The appearance of the product is spherical and angular, good gloss, mechanical vibration three times screening, grading conform to the relevant technical indexes. Uniformity coefficient (K60) of not more than 1.5 (Japan), uniformity coefficient (K80) between 1.6-2.0, void ratio greater than 50%.

The range of particle size is smaller than the minimum size specified by weight not more than 5%, greater than the specified maximum size not larger than 5% by weight.