Delivery Time:50~65 days
Certification:ISO

ASTM A388, 4145H, 4145Mod Drilling Stabilizer, Normalizing + Tempering +Q&T Heat Treatment
Specifications:
1.Material: 4145H, 4145Mod, 40CrMnMo, etc.
2.UT: ASTM A388
3.Smelting method: EAF+LF+VD
4.Heat treatment: normalizing + tempering + Q&T

5.Chemical component(%):

C	Si	Mn	P	S
0.43~0.49	0.20~0.35	1.05~1.20	≤0.025	≤0.025
Cr	Ni	Mo	Cu
1.05~1.25	≤0. 25	0.25~0.35	0. 20

 
6.Standard Stabilizer Sizes:

Hole size	Body OD	Fishing Neck length	Blade Length	Blade Width	Tong Space	Bore	Oal Length
8	4 3/4	30	15	3	25	2 1/4	72
8 1/2	6 1/2	30	18	3	27	2 13/16	78
12 1/4	8	30	18	3 1/2	28	2 13/16	83
12 1/4	9 1/2	30	18	3 1/2	28	3	83
14 3/4	8	30	18	3 1/2	30	2 13/16	90
14 3/4	9 1/2	30	18	3 1/2	30	3	90
16	9 1/2	30	18	3 1/2	30	3	92
17 1/2	8	30	20	3 1/2	30	2 13/16	94
17 1/2	9 1/2	30	20	3 1/2	30	3	94
20-26	9 1/2-11	30	22	4	30	3	110
The Stabilizer size is designed according to customers’ requirements.
Wear-resisting belt types are  HF1000, HF2000, HF3000, HF4000.

Replaceable sleeve stabilizer is made up of a body and a centralizer body, and its advantage is quickly replaced by centralizer body when the front is wear and failure. It is flexible and especially suitable to play directional well.
Applications:

Replaceable sleeve stabilizer is an important tool of oil, gas and geology exploration drilling engineering, prevent well deflection. It is mainly used in setting with arger in rigid drill collars and drilling pressure to make well deflection rate and orientation rate smaller, improving well deep quality and drilling speed, reducing the drilling cost.