Delivery Time:1-8 Weeks
Power Adapter 80W single current output 36Vdc/2.2A MDA80-220S36
1. Summary
This adaptor is for medical use with input power ranging at 90-264Vac,single current output 12Vdc/5A, and peak current 6A. It provides overcurrent protection, short circuit protection, overvoltage protection and overheat protection.
2. Product’s Key Features
| Model | Input Voltage Range | Rated Output Voltage | Output Current Range |
Ripple(Peak) (Rated Load,bandwidth Limitation 20MHz) |
| MDA60-220S24 | 90—264Vac | 36Vdc | 0—2.2A | ≤150mV |
3. Adoption Standards and Guidance
1) GB/T 2423.1—2008 Environmental Testing for Electrical and Electronic Products – Part 2: Test Methods/Test A: Low Temperature
2) GB/T 2423.2—2008 Environmental Testing for Electrical and Electronics Products – Part 2: Test Methods/Test B: High Temperature
3) GB/T 2423.3—2006 Basic Environmental Testing procedures for Electric and Electronic Products -- Test Ca: Damp Heat, Steady State
4) GB/T 2423.4—2008 Basic Environmental Testing procedures for Electric and Electronic Products -- Test Db: Damp Heat, Cyclical
5) GB/T 2423.5—2008 Environmental Testing for Electrical and Electronic Products – Part 2: Test Methods/Test Ea and Guidance: Shock
6) GB/T 2423.6—1995 Environmental Testing for Electrical and Electronic Products – Part 2: Test Methods/Test Ea and Guidance:Collision
7) GB/T 2423.8—2008 Environmental Testing for Electrical and Electronic Products – Part 2: Test Methods/Test Ed:Free Fall
8) GB/T 2423.10—2008 Environmental Testing for Electrical and Electronic Products – Part 2: Test Methods/Test Fc and Guidance:Vibration (Sine)
9) GB/T 14714.1—2008 Micro-computer Systems and Equipment General Specification of Switching Power Supply
10) GB/T 17625.1—2012 Limits for harmonic current of low voltage electrical and electronic equipment.
11) GB/T 17625.2-2007 Electromagnetic compatibility limits on voltage fluctuations and flicker created by devices with rated current less than 16A under low-voltage power supply systems.
12) GB/T 17626.1-2006 Electromagnetic compatibility testing and measurement techniques overview of immunity test.
13) GB/T 17626.11-2011 Electromagnetic compatibility - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity test
14) GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test
15) GB/T 17626.3-2006 Electromagnetic compatibility - Testing and measurement techniques - RF electromagnetic field immunity test
16) GB/T 17626.4-2008 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient/burst immunity test
17) GB/T 17626.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge (impact) immunity test
18) GB/T 17626.6-2008 Electromagnetic compatibility - Testing and measurement techniques – Immunity test for RF induction transmission to disturbance
19) GB/T 17626.8-2006 Electromagnetic compatibility - Testing and measurement techniques - Power frequency magnetic field immunity test
20) GB/T 17626.9-2011 Electromagnetic compatibility - Testing and measurement techniques - Pulse magnetic field immunity test
21) GB/T 1772-1979 Test method for determination of failure rate of electronic elements and components
22) QJ/T 1950-1990 Static operating system technical requirements
23) GB/T 6991-1986 Representation of reliability data for electronic components
24) MIL-HDBK-217F Electronic equipment reliability prediction
25) GJB/Z-299B Electronic equipment reliability prediction manual
26) GB9706.1-2007 Medical electronic equipment safety
4. Environmental Conditions
| Serial No. | Item | Technical Indictor | Unit | Remarks | |
| 1 | Working temperature | 0 — +40 | ℃ | ||
| 2 | Storing temperature | -20 — +85 | ℃ | ||
| 3 | Relative humidity | Working | 20—90 | %RH | |
| Storing | 10—95 | ||||
| 4 | Altitude | ≤3000 | m | ||
| 5 | Cooling-down method | Natural cooling |
5. Power Features
