Delivery Time:Based on Detailed Order
Certification:CE

Hydraulic Core Drill Rig For Mining ,Mineral exploration Drilling Machine HYDX-4

Mineral exploration drilling rig HYDX-4 could substitute expensive famous products.

It could be applied to exploration and prospecting of mineral, geology, metallurgy, coal, petroleum, natural gas, groundwater and other industries.

I．Brief Introduction

The core drill rig of full hydraulic and rotator adopted the technology of wire-line coring has been the dominant type rig for solid mineral deposits prospecting in developed counties in the world. It is also the developing direction of drilling technique and drilling equipment in China. Under these circumstances,

SINOCOREDRILL has developed the HYDX-4 core drill rig successfully according to the situation of China. This type of drill rig could substitute imported products. It could be applied to exploration and prospecting of geology, metallurgy, coal, petroleum, natural gas, groundwater and other industries. The drill rig is equipped with a series motor driving pump. The feeding and lifting of rotator are driven in the structure of cylinder directly pushing, with a 3.5m(11.5 feet) stroke.

The rotation of spindle is driven by a single engine. It has four mechanical shifts of range of speeds, and the speed could be adjusted hydraulicly with stepless change.   

The rig is simple in structure. It is light and easy for transference; the mast has the functions of sliding and touching ground; the spindle lifted and lowered with hydraulic cylinder; it could be folded for transport and relocation. The spindle hole is in large diameter. 

The core drill rig of full hydraulic and rotator adopted the technology of wire-line coring has been the dominant type rig for solid mineral deposits prospecting in developed counties in the world.

Main Parameters:

Diesel Engine	Model	Cummins 6BTA5.9-C180 (turbocharged and charge water cooled)
Displacement	5.9L (1.56 US Gallons)
Power	132Kw (180HP)
Rated RPM (Factory setting)	2200rpm
Drilling Capacity	BQ	1000m(3280feet)
NQ	700m(2296 feet)
HQ	500m(1640 feet)
Drill Head	Rotation Motor	Hydraulic Motor-variableMaker: SAUER-DANFOSS
RPM	Four Shifts/ Stepless Change 0-1100 RPM
Ratios	1st     14.422:1 2nd     8.171:1 3rd   4.519:1 4th   2.652:1
Head Opener	Pivoting style, Manual actuated
Hydraulic Chuck(PQ)	Hydraulically opened, Disc Spring Clamping, Normally C Closed Type Axial Holding Capacity of 222400N
Max. Torque	4200 N·m(3098 lbf·ft)
Hold Diameter	98 mm(3.86 inch)
Max. Lifting capacity of Spindle	150 kN(33720 lbf)
Max. Feeding Power	60 kN(13480 lbf)
Primary Pump	Hydraulic pump Axial Piston variable displacement Triplex pump for driving of rotator, winch mud pump & leveling jacks.With load sensing system.	Maker: DANFOSS 1st Pump:148LPM at 31.5MPa 2nd Pump:120LPM at 28MPa 3rd Pump:50 LPM at 16MPa
Hydraulic Tank	Capacity	310 L (82 US Gallons)
Capacity of Main Hoist	Hoisting force (si