Delivery Time:30 working days
Certification:CE
PP PS HIPS PVC PET Disposable cup making machine with programe to adjust for PP PS HIPS PVC PET
Specifications1.PLC&Touch Screen:Siemens,Germany
2.Servo moter use Yaskawa,Janpan
3.4 Pillar with high quality
4.35cycles/min
Feature :
1.It suits for forming PP, HIPS, PVC, PS, PET sheet.
2.Hanging type for Microcomputer. The frame is exported from Germany.
3.Four pillars to fix machine
4.Servo motor drivers control sheet feeding.
5.Servo motordrivers control stretching mechanism.
6.Electric Control Panel can be separate from thermoforming machine when it\'s working
7.Automatically lubricate the movement parts of thermoforming machine.
8.Oven system automatically move out when the power is off.
9.Hydraulic pressure system drives thermoforming mechanism.
10.The machine\'s whole track can move backward: Easy to change & install the moulds. To shorten the time for changing the moulds, it increases the productivity & saves the time & money.
1.It adopts PLC&Touch Screen:Siemens,Germany.
11.Automatic load for sheet roll: It\'s a motorized \"un-rewinder\" to feed the film into the thermoforming machine. No need to pull the sheet directly, through a separate un-rewinder that unrolls the sheet, sensor can induce & decreases the tension prior of going into the thermoforming area.
12.PID temperature control.
Technical Parameter:
This is a fully automatic plastic cup making machine integrate the Thermoforming part and Inverted cup stacking function.
The process of this machine is thermoform the plastic sheet to make cups then the cups through to the Inverted device into to the Stacker for Automatic Stacking, Counting and out of the machine tidily.
Application Area:
It is suitable for forming PP, PS, PVC & PET cups
Key Features:
1.Controlled by PLC and using Touch-screen.
2.Servo motor used in Sheet-feeding Device and Pulling Device.
3.Used in high level production line.
4.Low pollution and wide range use for the manufacturer
Main Technical Parameters:
| Power | 3-phase, 380V, 50HZ |
| Sheet Width | 500-740mm |
| Range of Sheet | 0.6-2.0mm |
| Max Forming Area | 600X300mm |
| Max Forming Depth | 120mm |
| Speed | 20-28 cycle/min |
| Air Pressure | 0.6-0.7Mpa |
| Air Consumption | 3m³/min |
| Water Consumption | 2T/hr |
| Machine Dimension | 12500X3000X2770mm |
| Machine Weight | About 10T |
Main Brand for Electrics and Pneumatics
1.SIEMENS
2.OMRON
3.MITSUBISHI
4.FUJI
5.FESTO
6.SMC
7. TAIWAN
