Certification:CE, RoHS

Max 3000 Lumens DH30 Canister Dive Light , CREE XM-L U2 LED Cave Diving lamp

PRODUCT SPECIFICATIONS:

Model	DH30 Canister Diving Light
Bulb	CREE XM-L U2 LED*3 (Max 3000 Lumens)
Modes	High> Low>Strobe> off
Runtime	High: 210 min, Low: 420 min, Strobe: 300 min
Color temperature	6500K
Reflector	Glossy Aluminum reflector
Lens	8mm Polycarbonate Board
Body material	Durable aircraft-grade aluminum
Angle of light beam	8° hot spot, 110° periphery
Surface treatment	Premium Type III hard-anodizing
Color	Black
Battery	26650 Li- ion battery *3 in canister
Circuit Protection	With battery over-discharging protection, polarity reversing protection
Operation voltage	9V to 14V
Waterproof	100 meters underwater
Dimensions	light head: 84mm (length) *82mm (dia. of head); canister: 233(length)*36mm (dia. of body)
Weight	1000 grams (without batteries); 1300 grams (with batteries)
Underwater Weight	710 grams (with batteries)
Impact resistance	1.5M

BATTERY INSTALLATION

Remove the top cover of the canister by turning counter-clockwise. Remove used batteries and replace with fresh batteries as shown by the polarity stickers. Mount the cover by turning clockwise.

BATTERY CHARGING

1.Plug the charger in the wall power socket, the indicator light is green in the free-load status.

2.Put the battery in the slot of the charger.

3.The indicator light is red if the battery is not fully charged; it will turn green after fully charged.

4.Take out the fully charged battery and use them in the canister.

ON/OFF

Push the switch forward to activate the light.

The switch will go back to original position automatically.

MODES CHANGING

Successive switch ON-OFF within two seconds to cycle through high, low, strobe.

SCUBA DIVING APPLICATION

Check closely for cuts, scratches, or an otherwise damaged o-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the o-ring sealing surfaces.

KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.

CAUTION

If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please remove the batteries during transportation to prevent it from misoperation.

WARRANTY RETURN POLICY

Please contact your local distributor or retailer for information on how to handle your warranty items.

REPLACEMENT PARTS

CAT#                      DESCRIPTION

DH308                   O-ring

DH309                   Lens