High quality custom precision plastic mold parts manufacturer

plastic mold parts

Plastic mold parts edge gate:plastic mold parts runner and gate at the parting line,plastic mold parts products in the mold with demolding, the most simple design, easy processing, low cost, so more people to use flood system operation.Plastic mold parts small inlet die: runner and gate is not in the parting line, generally on the products directly, so to design a set of nozzle parting line, design is more complex, processing more difficult, usually depending on the product requirements and selection of fine nozzle system. (3): the hot runner mold mold structure and fine nozzle is largely the same, the biggest difference is the passage in one or more constant temperature hot runner plate and heat pump mouth, no cold material release, runner and gate on the products directly, so the channel does not need to release, this system is called without nozzle the system, which can save raw materials, suitable for raw materials, products more expensive higher requirements, design and processing difficulty, high cost of mold.

Briefly Description

1. mold part material brand: Hatachi, Daido, ASSAB,Buderus, Bohler,etc

mon material used: SKD61,SKD11,SKH51,NAK80,P20;1.2343,1.1730,1.2312;S390,K460

3.Grinding precision  within 0.001.EDM/wire cut precision within 0.005mm

4. milling, surface grinding, wire cutting,CNC,EDM are the main production process

5.height gauge,microcalliper,profile projector,tool microscope, comparator are the main inspection equipment

6.more than ten years' experience in this field

7. ISO9001:2008 certified factory with good quality and management

8.100% of the parts are exported to countries like Japan,USA,Europe,Southeast Aisa,etc

shiyipart11 is here to serve you! recommend you plastic mold parts

Contact Yize Mould

Dongguan YIZE MOULD Co.,LTD

plastic mold parts Address: Hexing Road No.122, South Shatou District, Chang'an Town, Dongguan City, Guangdong Province

plastic mold parts TEL: 0769-81888 522  

plastic mold parts FAX: 0769-81888 548

plastic mold parts Website:

plastic mold parts E-mail: Jack@dgyize.com