Double Bearing Brushless Alternator 120 kw 140kw 150kw Class H Insulation Generator

Delivery Time:Within 7days to 15 days after getting the deposit L/C or T/T
Certification:CE ISO

Double Bearing Brushless Alternator 120 kw 140kw 150kw Class H Insulation Generator

 
Quick Details:
 

Company Information:

Thank you for visiting Jiangsu Farrand Generator Technology CO., Ltd,brought to you general power.

With few years of experienced in the Power generation industry.We have good repution in the market.Our company specializes in distribution and export of:

All interface according to international standard, and matches all world famous generator set in the world. Such as Cummins, Deutz, MTU, Derkins, Volvo ect.

In order to provide good service to you,we relies on:

With a well established and growing customer,we currently/recently have served customer countries such as Argentina,Canada,Chile,Colombia,France,Hongkong,Mexico,Pakistan,Peru,Philippines,Russia,Saudi Arabia,South Africa,South Korea,Turkey,UK,USA,Venezuela,etc.

We thank you once again for visiting our website,we hope it has been useful and clearly presented and we take this opportunity to remind you we remain at your service.Please do not hesitate to contact us.we appreciate you,you are the reason we are here.Thank you for choosing Farrand Generator,power generation solution.

Specifications:
 
Brushless AC generator, suitable for operation at 1500 /1800RPM, 170V and up to 454 Volts, 0.8 pf (lag) suitable for 50 Hz &60Hz, 3 phase & 1 phase, 4 wire system. The alternator is designed and built to withstand tropical conditions. The alternator generally conforms to IEC 34-1/34-2 , BS 4999/5000 and IS: 4722-2001 with enclosures rating IP 23 is the standard version, satisfying IEC 34-5/IS : 4691/DIN VDE 0530-5 requirements. The Alternator is dynamically balanced , brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator has the following features:

1. +- 1.0 % Voltage regulation (max.) in static conditions

2. IP: 23 protection with insulation class H

3. Permissible overload of 10% for one hour in 12 hours of operation.
The generators have been designed for use in a maximum ambient temperature of 40℃ and altitude less than 1000M above sea level.
Arranges in order all voltages may obtain from the single wide wingding ,also namely(three -phase) and 4(single -phase) reorganizes through 12 terminals may obtain.
 
 
Purchasing a FLD 274Series from us will include the following specification at no additional cost:

· 4 Poles

· Single Phase or three phase

· power factor 0.8 or 1.0

· 1800rpm or 1500rpm

· 60hz or 50hz

· Available voltage from 170v and up to 454v

· 4 lead alternator

· Class H insulation

· IP23 enclosure

· High efficiency

· SX440 Automatic Voltage Regulator

· MX341 Automatic Voltage Regulator with PMG

 
Features:
 
1. Optional permanent magnetic alternator , provide invariable excitation in any situation.
2. Easy to be connected with power network or other alternators. Standard 2/3pitch windings avoid excessive neutral current.
3. Dynamically balanced rotors, with single or two sealed ball bearings.
4. Simple installation and maintenance with easy access to terminals, rotating diodes and coupling bolts.
5. Wide range of flange adaptor and single bearing coupling disc.
6. Built to conform to all leading industrial standards.
 
 
The advantage of our material:
 

· The rotors and stators with 100% copper wire.

· The enamelled wire is Essex by America.

· The silicon steel sheet we use is the products of Wugang Brand,800 Series.which is the most famous manufacture of steel.And its advantage is its magnetic flux is large and its iron loss is small.

· The main frame of the alternator and lead box are made of steel,the end cover is made of high strength cast iron.

· All the components of our factory,the stator,rotor and excitation will be dipping lacquer twice.

· The rope of best nylon to be used in all the rotors and stators.We p