5.5 Kw Steel Metal Roof Roll Forming Machine With Manual, Automatical Decoiler

  Specifications of Metal Roof Roll Forming Machine  

Material thickness: 0.3-0.8mm Material width: depend on customer’s requirement Decoiler Type: manual or automatical type ( depend on customer’s requirement ) Weight Capacity Of Decoiler: 5 Ton Main Motor Power: 5.5 Kw Hydraulic Motor Power: 3 Kw Electrical Control: PLC Frequency Control System with touch screen PLC: PANASONIC Brand Encoder: OMRON Brand Transducer: PANASONIC Brand Machine Weight: about 5 Ton Forming Station: 13-20 ( depend on profile drawing ) Material of Roller: High grade 45# forge steel, Polished and coated with 0.05mm Chrome Surface. Main Axis Material: High grade 45#, quenched and heat treatment. Axis Diameter: ¢ 76mm Working Speed: 0-15 m/min Transporting Type: Chain Transmission Heat Treatment of Cutting Blade: HRC 50-60 Type of Cutting: Hydraulic cutting Material Of Cutting Blade: C r 12 Heat Treatment of Cutting Blade: HRC 50-60 Machine Frame stand: Welded structural steel Thickmess of Fame Steel: 18mm

  Composition of Metal Roof Roll Forming Machine  

Decoiler / Uncoiler	1 Unit
Feeding Guide	1 Unit
Metal Roof Sheet Roll Forming Machine	1 Unit
Hydraulic Cutting System	1 Unit
Hydraulic Station	1 Unit
PLC Computer Control Box	1 Unit
Support Tables	2 Units

  Maintenance of Metal Roof Sheet Roll Forming Machine  

Daily maintenance plays an very importance role in extending the operation time and of Metal roof sheet roll forming machine and the good quality finished metal roofing. The following points should be part of the machine\'s daily production and usage routine.

1.  Regularly lubricated the outside parts of the trapezoidal roofing sheet roll forming machine, such as the driving chain...

2.  Regularly brush the surface of roller, particularly when working outside. If you do not use the trapezoidal roof panel forming machine in a long time, you should apply luricating oil on the roller surface, make sure you clean it for next time running machine.

3.  If the Trapezoidal sheet roll forming machine is not operated in a long period, should cover it with plastic film, to avoid getting rain or dust on the machine, or avoid the machine becoming dampt, especially the PLC electric control board.

4.  Make sure the cutting system is lubricated when necessary.

5.  Check the Hydraulic station often and the oil quantity of the deceleration machines, add more oil if the oil level is low.

6.  Check the electric appliances box and every leads conjuction circumstance of the trapezoidal roof sheet roll forming machine.

  Reference Roof Drawings  

  Our Advantage  

High Quality Reasonable Price Good after Service 1 Year Warranty More Than 10 Years Experience