Delivery Time:25-30working days
Certification:ISO,CE,SGS

Linear Tea / Milk Fruit Juice Filling Machines For PET / PVC Bottle
1. Process:
 
(Raw water) -> Water Treatment Equipment -> Pre-treatment 
capping machine inverted bottle sterilization spray tunnel drying machine(Caps) -> bottle sterilizer -> Wind Cap Feeder -> Ricoh capping machine
Stenciling real bottle conveying cushioning system automatically shrink sleeve labeling machine labeling machine automatic film charter (storage)
 
2. The whole production line process description:
 
Depending on the configuration program, arranged neatly into the empty after washing, filling and capping three units. Triple unit into the bottle, rinse with ozone water, filling materials, after capping machine capping machine with conveyor sent outside after entering the packaging system.
In the post-packaging systems, the first of the bottle for Chit, and then with inkjet spray on the bottle production date and batch number, with automatic shrink sleeve labeling machine shrink sleeve label, after passing through the light inspection, enter film charter, then manually pallet, storage.
 
 
The production line is as follows:
 
1) Preparation of pure water Material: After deployment of good juice pure water through the pump into the filling system filling.
2) Chong bottles of water: bottles of water rushing through the pure water treatment systems for the treatment of water containing UV disinfection into red bottle rinser for use.
3) filling area (room) air purifier: air through the early effect, in effect, and HEPA filtered and sent to the filling area (room), so that the air inside the filling machine reaches 10,000 (static) purification standards. While filling the entrance between the buffer room, dressing room, foot tub, air shower room and other facilities to ensure the filling between the sanitary and clean.
4) cap disinfection, management cover: meet the technical requirements to use artificial pour bottle sterilizer bottle bucket, with ozone, ultraviolet disinfection after a certain time, into the wind Cap Feeder hopper, wind Cap Feeder Cover by LM automatic control. The wind sent lid cover cap is automatically sent to the manager, management cover is the cover of the haphazard arrangement of finishing the same direction as the cover will cover into the capping machine capping.
5) products, filling and capping: filling material through to the filling system after cleaning PET bottles, after capping machine with reasonable cover cap for capping a semi.
6) After the product packaging: semi After Chit, Coding, sleeves, shrink label, wrap became refined by artificial pallet after storage.
 
 
3. Technical parameters:
 

Model	RXGF16-12-6
Number of stations	16 sterile washing bottle, filling 12, capping 6
Rated Capacity	5000 ~ 6000 bottles / hour (250ml / bottle)
Filling method	Pressure filling
Adaptation bottle	Diameter 50-90, bottle height 165-300
Air pressure	0.5 MPa
Gas Consumption	0.5M3/min
Washing with water pressure	0.2-0.25 MPa
Bottle water	0.8 tons / hour
Rated voltage	380V 50HZ
Main motor power	1.5Kw
Total capacity of motor	4.5Kw
Host Dimension	1950 × 1550 × 2500 (L × W × H) mm
Weight	About 2000Kg