Delivery Time:70days
Certification:CE

Locked Roof Panel Roll Forming Machine / Metal Roofing Machines For Sheet Locking

Quick Detail:

Composition
 

GWC75-380-760 This roof sheet roll forming machine consists of several parts, as listed below.
 

1. 5T decoiler
2. roll forming machine
3. Hydraulic shear
4. Hydraulic station
5. PLC control cabinet
6. run out table

Working process:

Passive decoiling → guided material feeding → roll forming → cut-to-length → run out

Description:

Features
 

1. The GWC75-380-760 locked roof panel roll forming machine is a high quality product, and it could deliver satisfying performance. It is able to fabricate roof panels with the largest depth among the joint-hidden roof panels. So, the panel also has the highest mechanical strength, making it applicable even when strong wind or heavy snow exists.

2. On the other hand, there are two vertical reinforcing ribs on the bottom side of the panel, and corrugation is avoided during production. The installation method is 360 degree interlocking which gives the best waterproof performance. Owing to these, the finished panels are commonly seen in medium- and large-sized industrial buildings with large span, such as workshop, warehouse, hangar, stadium, theatre, engine house, exhibition hall, etc.

3. As mentioned above, the 360 degree interlocking method is used when mounting the roof panels. This means that the production equipment for the panel must be very precise, or the panels won\'t be arranged in a perfect manner which may lead to safety problems. Considering this, our locked roof panel roll forming machine is precisely manufactured and fully meets the requirement. In particular, the rollers are scientifically designed and then meticulously processed by CNC machines.

Applications:

workshop warehouse hangar gymnasium theatre exhibition hall engine house industrial buiding civilian buiding

Specifications

Model	GWC75-380-760	Note
Applicable material	Color plate, galvanized sheet, galvalume plate and aluminum sheet	This machine is customizable upon each customer\'s requirements and the characteristics of processed material.
Feeding width	1000mm
Processing thickness	0.4-0.8mm
Roller material	45# steel coated with hard chrome
Main motor power / hydraulic station power	7.5kW / 3kW	These parameters can be set according to the required production capacity.
Forming passes	26
Forming speed	5-15m/minute
Machine dimensions	11×1.3×1.2m
Machine weight	10T

Competitive Advantage:

1. This roof panel roll forming machine is a very mature product, and there is no need to redesign it, thereby greatly reducing the production cycle.