1. Product Featureof Electronic Potting Silicone Rubber
HY 9055 siliconerubber is a kind of low viscosity, Inherentflame resistance, two components addtion cured potting silicone withheat-conducting. It cures with both on room temperature and heated temperature.It has the feature of the higher temperature the faster of the curing time. Itcan be applied to electronic components for insulation, waterproofing, fixedand flame retardant. It mainly applied in electronic components surface withmaterials of  PC(Poly-carbonate)、PP、ABS、PVC, etc. and metal materials.

2. Typical Applicationof Electronic Potting Silicone Rubber

HY 9055 electronicpotting silicone rubber could be applied to

- high powered electronics, 

- DC/DC module and circuit board whichrequires heat dissipation and high temperature resistance.

-It can be broadly used for LED screen, WindPower Generator, PCB substrate, etc.

3. Technical Guidelines of of Electronic Potting Silicone Rubber

a, Pls put part A and part B in separatecontainer and stir evenly before mixing the two part together.

b, Mixing Ratio: part A: part B = 1:1

c, Deaeration the mixture in vacuum pumpunder 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.

Note:Thethickness of the silicone affects the curing time. If the silicone used is alittle thick,then the curing time will be a little longer.The temperature alsoaffects the curing time.When in lower temperature, we suggest customersappropriately heat the mixture to accelerate vulcanization. With temperature of80～100℃, the silicone will cure in 15minutes; while in 25℃ room temperature, the silicone will cure around 8 hours.