Delivery Time:3-7 days
3 phase Amplifier Mitsubishi AC Servo Motor MR - J3 - 100A 1 KW with Sine wave PWM control
Quick Detail :
| Product Name | Power | Interface | Interface Power Supply | Main Cirvuit Power Supply | Model |
| Voltage / Frequency | |||||
|
AC Servo Amplifier |
1 KW | General-purpose | 24VDC |
3-phase 200 to 230VAC 50 / 60Hz |
MR-J3-100A |
Feature :
• With a capacity range of 50W to 55kW , added a high resolution encoder and advanced auto-tuning and vibration control.
• The J3’s high torque motor can operate at up to 6000 rpm, and has a speed frequency response of 2100Hz.
• Twenty percent smaller than its predecessor, the J3’s high resolution 262 , 144 ppr encoder is mounted as standard to provide stability even at low speeds.
• The MR-J3 supports the following control methods: Position, Speed, Torque, SSCNET III Network, CC-Link , RS-485 Multi Drop and now Turret Index.
Specifications :
| Model | MR-J3-100A | |
| Product Type | MR-J3 AC Servo Amplifier | |
| Main Circuit Power Supply | Voltage / Frequency | 3-phase 200 to 230VAC 50/60Hz |
| Permissible Voltage Fluctuation | 3-phase 170 to 253VAC | |
| Permissible Frequency Fluctuation | ±5% maximum | |
| Control Circuit Power Supply | Voltage / Frequency | 1-phase 200 to 230 VAC 50/60Hz |
| Permissible Voltage Fluctuation | 1-phase 170 to 253 VAC | |
| Permissible Frequency Fluctuation | ±5% maximum | |
| Power Consumption (W) | 30 | |
| Interface Power Supply | 24VDC ±10% (required current capacity: 300mA | |
| Regenerative Resistor / Tolerable Regenerative Power (W) | Built-in Regenerative Resistor | 20 |
| Control System | Sine-wave PWM control/current control system | |
| Dynamic Brake | Built-in | |
| Position Control Mode | Maximum Input Pulse Frequency | 1Mpps (when using differential receiver), 200kpps (when using open collector) |
| Positioning Feedback Pulse | Resolution per encoder/servomotor rotation: 262144 p/rev | |
| Command Pulse Multiple | Electronic gear A/B multiple, A: 1 to 1048576, B: 1 to 1048576, 1/10 < A/B < 2000 | |
| Positioning Complete Width Setting | 0 to ±10000 pulses (command pulse unit) | |
| Excess Error | ±3 rotations | |
| Torque Limit | Set by parameters or external analog input (0 to +10VDC/maximum torque) | |
| Speed Control Mode | Speed Control Range | Analog speed command 1:2000, internal speed command 1:5000 |
| Analog Speed Command Input | 0 to ±10VDC/rated speed | |
| Torque Limit | Set by parameters or external analog input (0 to +10VDC/maximum torque) | |
| Structure | Fan cooling open (IP00) | |
| Weight kg (lb) | 1.4 ( 3.1 ) |
Mitsubishi MR-J3 Series AC Servo Amplifiers are available as below :
MR-J3-10A
MR-J3-20A
MR-J3-40A
MR-J3-60A
MR-J3-70A
MR-J3-100A
MR-J3-200AN
MR-J3-350A
MR-J3-500A
MR-J3-700A
