OMRON Photoelectric Sensor, buy Diffuse reflective 100 mm OMRON Photoelectric Sensor With Iron mounting bracket E3S - DS10E41 on China Suppliers Mobile

Product Details

Delivery Time:3-7 days

Diffuse reflective 100 mm OMRON Photoelectric Sensor With Iron mounting bracket E3S - DS10E41

Quick Detail :

Product Name	Sensing method	Sensing distance	Connection method	Power supply voltage	Model
Photoelectric Sensor with Built-in Amplifier	Diffuse-reflective	100 mm	Pre-wired (2 m).	12 to 24 VDC	E3S-DS10E41

Features :

• General-purpose Photoelectric Sensor for High Quality and Reliable Detection

Specifications :

Model	E3S-DS10E41
Type	Photoelectric Sensor with Built-in Amplifier
Sensing method	Diffuse-reflective
Sensing distance	0 mm to 100 mm (White paper 50*50mm)
Differential distance	20% Max. of sensing distance
Light source	Infrared LED (950nm)
Power supply voltage	12 to 24 VDC -10% to 10% (ripple(p-p) :10% Max.)
Current consumption	40mA DC Max.
Control output ( Output type )	NPN voltage-current output
Control output ( Load current )	0 to 80 mA
Control output ( Residual voltage )	(DC) 1 V Max. (Load current 80mA Max.)
Operation mode	Light-ON/Dark-ON selectable
Protective circuit	Surge suppressor Output short-cut protection Power supply reverse polarity protection Mutual interference prevention
Response time	1 ms Max.
Sensitivity setting	Single-turn adjustment
Ambient illuminance	Incandescent lamp:3000 lux Max., Sunlight:10000 lux Max.
Ambient temperature	Operating: -25 to 55 CEL Storage: -40 to 70 CEL (with no icing or condensation)
Ambient humidity	Operating: 35 to 85 %RH Storage: 35 to 95 %RH (with no condensation)
Insulation resistance	20 M OHM Min. at 500 VDC between charged parts and the case
Dielectric strength	1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	500m/s2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP65
Applicable standard ( EC Directive (EMC Directive) )	CE marking: Not equipped
Connection method	Pre-wired models (Cable length: 2 m)
Indicator	Light indicator(red), Stability indicator(green)
Weight (packed state)	approx. 80 g
Material (case)	PBT
Material (lens)	Polycarbonate
Material (mounting bracket)	Iron
Accessories	Instruction manual, Mounting bracket(with screws), Adjustment bracket