Delivery Time:3-7 days
PBT 2m NPN Output OMRON Photoelectric Sensor E3X - NA11 Fiber Amplifier Units
Quick Detail :
| Product Name | Item | Connection method | Control output | Power supply | Model |
| Amplifier Unit | Standard model | Pre-wired (2 m) | NPN output | 12 to 24 VDC | E3X-NA11 |
Features :
• Simple and Affordable Fiber Amplifier Units
• Use the one-key one-function feature for quick , easy operation.
• GIGA RAY for the highest level of power in this class for stable detection even with sensing objects with low reflection or large sensing objects.
Specifications :
| Model | E3X-NA11 |
| Product outline | Simple fiber sensor (Bar display, Adjuster setting) |
| Sensing distance (Typical) | E32-TC200: 0 to 800 mm E32-DC200: 0 to 300 mm |
| Light source | Red LED |
| Emission wave length | 625 nm |
| Power supply voltage | 12 to 24 VDC -10% to 10% ( ripple(p-p) : 10% Max.) |
| Current consumption | 40 mA Max. |
| Operation mode | Light-ON / Dark-ON selectable |
| Control output (Output type) | NPN open collector output |
| Control output (Load current) | 0 to 50 mA |
| Control output (Residual voltage) | (DC) 1 V Max. (load current : 50mA Max.) |
| Protective circuit | Surge suppressor Output short-cut protection Power supply reverse polarity protection |
| Response time | Operate 200 us Max., Reset 200 us Max. (More than 8 sensors connected : 350 us Max.) |
| Mutual interference prevention | 5 Units |
| Sensitivity setting | 8-revolution adjuster with indicator |
| Function | Timer function |
| Ambient illuminance | Incandescent lamp:10000 lux Max. Sunlight:20000 lux Max. |
| Ambient temperature (Operating) | Groups of 1 to 3 Sensors:-25 to 55 CEL Groups of 4 to 11 Sensors:-25 to 50 CEL Groups of 12 to 16 Sensors:-25 to 45 CEL (with no icing or condensation) |
| Ambient temperature (Storage) | -30 to 70 CEL (with no icing or condensation) |
| Ambient humidity | Operating: 35 to 85 %RH Storage: 35 to 85 %RH (with no icing) |
| Insulation resistance | 20 M OHM Min. at 500 VDC between charged parts and the case |
| Dielectric strength | 1000 VAC at 50/60 Hz for 1 minute between charged parts and the case |
| Vibration resistance | 10 to 55 Hz1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 500m/s2 for 3 times each in X, Y, and Z directions |
| Connection method | Pre-wired models (Cable length: 2 m) |
| Indicator | Operation indicator (Orange) |
| Weight (packed state) | Approx. 100 g |
| Material (case) | PBT |
| Material (cover) | Polycarbonate |
| Mounting | DIN rail or the mounting bracket type E39-L143 (sold separately) |
| Accessories | Instruction manual |
OMRON Fiber Amplifier Units are available as below :
E3X-NA11
E3X-NA41
E3X-NA6
E3X-NA8
E3X-NA11F
E3X-NA41F
E3X-NA11V
E3X-NA41V
E3X-NA14V
E3X-NA44V
