Model No.:CHJ/Y1
Product Origin:China
Brand Name:CHUNHUI
Price Terms:FOB Ningbo / Shanghai
Payment Terms:T/T or L/C at sight
Certification:QS9000
Description:Product Name: ABS (Antilock Braking System) Hydraulic RegulatorModel Number: CHJ/Y1Place of Origin: ChinaFeatures: 1) When conducting braking, if one of the tyres is going to stop running, the normally-open valve will be closed, at that time, even though the force on the pedal is increasing, the pressure on the brake will remain the same. In such condition, the regulator will instruct the normally-close valve to open and then is the pressure-reduction time, after that, when the trend of stop of running of tyre is eliminated, the normally-open valve will open, while the normally-close valve close and the braking pipeline will be at the normal time of pressure increasing again 2) The low-pressure accumulator has the structure of spring piston, the function of which is to temporarily keep the brake fluid the reflux pump doesn't have the time to pump out 3) The reflux pump is of plunger structure, driven by the motor, and gives the brake fluid back to the brake baster cylinder when ABS is conducting braking 4) The high-pressure damper is to reduce the drastic pulsating of the hydraulic pressure when ABS is conducting braking and reduce the noise of hydraulic pressure as well Technical requirements: 1) Medium: brake fluid (DOT4); temperature range: -40oC- 125oC; working pressure range:14-16Mpa; coil voltage: 12V (DC) 2) Insulation resistance: above 100MΩNo flashover and breakdown under 500V for one minute 3) All the components should be free of burs and damages and cleaned before assembly 4) No leakage is allowed when the hydraulic regulator is under 1.5 times of the working pressure for 3 minutes; And no fragmentation and damage occurs when it is under 2.5 times of the working pressure for 1 minute 5) The hydraulic regulator should pass 100 million times of operation test and the moving parts will not get stuck during the test 6) The reaction time of opening and closing of the solenoid valve is no more than 5ms when it is loaded 7) The time of repeatability of opening and closing of the solenoid valve is 0.1ms Outer packing: 12 sets/ctn