Delivery Time:7-15days
Certification:ISO
Accuracy YHS787 Multifunction Process Calibrator , 24 / 30mA Output Voltage
Quick Detail:
• 1000V overload protection on V,ohms and frequency.
• 25% Manual Step plus Auto Step and Auto Ramp on mA output.
• Precision 1000V, 400 mA digital multimeter
• 0.1% DC voltage accuracy
• 0.05% DC current accuracy, 1uA resolution
• Simultaneous mA and % of scale readout
• True RMS AC voltage measurement to 1 kHz
• Min/Max/Average/TouchHold/Relative modes
Features:
• DMM and loop calibrator in one tool with the Measurement, source output, analog output and loop power mode process calibration multimeter
• Clear LCD display with backlight; 3, 999 counts (29.999 counts for DC Current)
• With HART (Measurement, process parameters, device configuration, calibration, access diagnostic information via HART protocol)
• 1000V overload protection on V,ohms and frequency.
• 25% Manual Step plus Auto Step and Auto Ramp on mA output.
• Precision 1000V, 400 mA digital multimeter
• 0.1% DC voltage accuracy
• 0.05% DC current accuracy, 1uA resolution
• Simultaneous mA and % of scale readout
• True RMS AC voltage measurement to 1 kHz
• Min/Max/Average/TouchHold/Relative modes
*** Measure Function: AC and DC volts & current, resistance, frequency and continuity
• DC voltage: 400m/4/40/400/1000V±0.03%rdg
• AC voltage: 400m/4/40/400V/700V±0.8%rdg
• DC current: 40m/400/10A±0.05%rdg
• AC current: 40m/400/10A±0.8%rdg
• Resistance measurement: 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ±0.1%rdg
• Frequency measurement: 0~50 kHz ±0.05%rdg
• Diode test and continuity beeper
***DC current source/loop calibrator :
• Current source/simulator: 0~24mA ±0.05%rdg; 0.001mA Resolution
• Loop Power Mode: 28V±5%
• Power: Ni – MH rechargeable batteries
• Work Temperature: 0°C~30°C (relative humidity 0~80%); 31°C~51°C (relative humidity 0~50%)
• Storage Temperature: -20°C~60°C (relative humidity <=80%)
• Demension: 200*100*40mm
• Weight: 600g
WARRANTY: one year
SPECIFICATIONS
|
Specifications |
Function |
Range |
Accuracy |
|
Source signal output Loop Calibrator |
DC mA Output (Source mode, 20mA at 1kΩ Burden) Power: Battary |
0~20.00mA |
±(0.05% + 5digit) |
|
4~20.00mA |
±(0.05% + 5digit) |
||
|
0~24.00mA |
±(0.05% + 5digit) |
||
|
DC mA Output (Simulate Mode 20mA at 1kΩ) Power: Compliance voltage 12V~32V |
0~20.00mA |
±(0.05% + 5digit) |
|
|
4~20.00mA |
±(0.05% + 5digit) |
||
|
0~24.00mA |
±(0.05% + 5digit) |
||
|
Current Adjust Mode |
Manual: coarse adjustment(1mA), fine adjustment(0.0001mA) and Step 25% Auto: slow smooth ramp, fast smooth ramp, slow smooth rate, fast smooth rate |
||
|
Multimeter |
DCV |
0~1000V |
±(0.1% + 5digit) |
|
ACV |
0~700V |
±(1% + 5digit) |
|
|
Resistance |
0~40MΩ |
±(0.2% + 10digit) |
|
|
Frequency |
0~20kHz |
±(0.05% + 2digit) |
|
|
DC mA |
0~40mA |
±(0.05% + 5digit) |
|
|
AC mA |
