Thermal Insulation Mortar Exterior Insulation Finishing System for walls
Negotiable /Meter
Min.Order:1 Meter
Guangdong Yunyan Special Cement Building Co., Ltd.
Color durable Epoxy Based chemical resistant grout , bathroom tile grouting
Colored Epoxy Based Tile Glue industrial epoxy grouting installation
Non-Shrink Epoxy Grouting Material Epoxy Floor Tile Joint Filler
coloured flexible Epoxy Grout Sealant , environmental epoxy based grout
commercial 2 component colored epoxy grout / grouting cement mortar
fast curing Epoxy Stone Adhesive construction glue for metallic / ceramic / glass
Thermal Insulation Mortar Exterior Insulation Finishing System for walls
Product features
■It has low thermal conductivity and good thermal insulation property that can inhibit the difference in temperature of the wall between summer and winter season effectively.
■It has good cohesive force and be suitable for different base planes.
■It has low contraction efficiency that can prevent effectively the cracking and hollowing and avoid forming hot and cold bridge.
■The construction is convenient and the product can be used after adding water and stirring.
■It is fire-retardant, non-toxic, environmental and good weather resistance.
■It if fast drying and drought, has good construction property.
Scope of application
■It is suitable for the insulations of various internal and exterior walls and different household floors, basements and heating system, etc.
■It is suitable for the play mode built-in that can make a protective layer for the EPS.XPS thermal insulation system.
Treatment of base plane
■The base materials should be smooth, strong, clean, and dry and non-grease, concrete curing admixture and other loose materials.
Product usage
■Depend on the thermal insulation thickness.
Construction technology
■Mix thermal insulation glazed hollow bead mortar and water as mixing ratio of 25: (26-5) kg, string completely and standing for 5 minutes, then stir again to get better effect.
■Plaster the mortar on the wall evenly, leveling with scraper; the thickness of mortar for each time should be about 2 centimeters, and interval is about 24hours.
■The curing time of thermal insulation glazed hollow bead mortar should be more than 5 days, depending on the thickness and temperature.
■The insulation layer should be covered by alkali resistant mash cloth and mortar overlay which should use the polymer mortar with good flexibility and excellent water resistance.
Attentions
■It should be operated in 5 ℃ -40 ℃ environment.
■The crust should be removed the surface of mortar becoming dry and strong.
■Never mix the dried mortar with water to reuse.
Storage period
■Keep in cold and dry place, unopened product is valid for 1 year.
Spec
■25kg/bag