HS-6103 Single-phase energy meter test bench.

can test ANSI AND IEC electric Meter

This Bench Comprises of PWM power source,standard digital energy meter,error processor,and PC processing software.Can test 3-60 Variors Energy Meter.

Technical Parameters:

1.Accuracy Class:0.05/0.1/0.2 %

2.Standard Energy meter: HS-5100 Single-Phase Wide-measurement-range Energy Meter,Accuracy class:0.05/0.1/0.2 ; Multi-path Voltage transformer: Accuracy class:0.01. Rated load per path: 10 VA

3.Voltage Range(V): 220V(240V Option) Output Range: 0~125%,Resolution:0.01% full range

4.Current Range(A):0.1 ~100A(200A option) Output Range:0~120%,Resolution:0.0001A(Min)

5. Phase Angle:0.360°.Resolution of phase angle setting:0.01°

6. Frequency: 45Hz ~65Hz,Resolution:0.01Hz

7.Output waveform distortion:Both Voltage and Current ＜0.5%

8.Output Voltage,current and power stability: ＜0.05% /3min

9.Output Capacity:

                           Current: 1000VA(120A)

                            Voltage: 400 VA(24 meter testing stations)

    If the number of energy meter to be tested is increased whenever necessary,its maximum load may be extended to current:1800VA, and Voltage:1000VA

10.Load Characteristics: Resistive,inductive and Capacitive(less than 4uF)

11.Starting current output:5mA(Min);Accuracy:5%;Starting power:Accuracy 5%

12.Test Stations: 24/48 (Standard), also 3-60 option.

13.Testing function: Accuracy testing,Creep testing,Starting up testing,Harmonic testing,repeatability testing,influencing testing,dial testing etc.

14.Input power supply:220V AC ±10%,50Hz;Max power consumption:1500VA(24 energy meter testing stations)

15. RS485/Rs-232

16. GPS timing system, HS-1012 standard clock,Option