Certification:ISO9001:2008,SGS,CE

Black Vinyl Coated Fencer Hexagonal Wire Netting , 25mm Mesh For Poultry

 
Black Vinyl Coated Fencer Wire Hex Netting

Quick Detail:
 
 

Electro Galvanized before Weaving Electro Galvanized After Weaving Hot Dipped Galvanized before Weaving Hot Dipped Galvanized after Weaving PVC Coated Before or After Weaving Stainless Steel Wire Galvanized Drawn Iron Wire

 
Description:
 
As to the materials, chicken wire mesh can be divided into four types: galvanized chicken wire, stainless steel wire netting, PVC chicken wire and brass chicken fence.
Galvanized chicken wire is mainly used in the garden for bird protection. The 13mm hole is mainly used to make fruit cages and sculpture. 25-50mm hole is for poultry enclosure, garden borders and bird protection. 31mm-50mm hole is for the rabbit cage.
PVC coated chicken wire is used in the garden or agriculture. The core wire is galvanized wire which has two types of electro wire and hot dipped wire. The protective PVC coating makes the chicken wire last many years longer than an uncoated chicken wire. The color has green,black and yellow. Custom colors are available by request.

 
                              

 
Applications:
 
Chicken wire netting is commonly used to fence poultry livestock, such as chickens.
It can be used to build cheap cages for small animals.
It is used in garden for small bird protection, or as poultry or small animals housing.It is also used in agricultural side.
 

Specification:
 

Poultry  Netting
Mesh	Min. Gal.v.G/()	Width	Wire Gauge(Diameter) BWG
Inch	mm	Tolerance (mm)	SQ.M
3/8\"	10mm	±1.0	0.7mm-145	2\'-1M	27,26,25,24,23
1/2\"	13mm	±1.5	0.7mm-95	2\'-2M	25,24,23,22,21
5/8\"	16mm	±2.0	0.7mm-70	2\'-2M	27,26,25,24,23,22
3/4\"	20mm	±3.0	0.7mm-55	2\'-2M	25,24,23,22,21,20,19
1\"	25mm	±3.0	0.9m-55	1\'-2M	25,24,23,22,21,20,19,18
1-1/4\"	31mm	±4.0	0.9mm-40	1\'-2M	23,22,21,20,19,18
1-1/2\"	40mm	±5.0	1.0mm-45	1\'-2M	23,22,21,20,19,18
2\"	50mm	±6.0	1.2mm-40	1\'-2M	23,22,21,20,19,18
2-1/2\"	65mm	±7.0	1.0mm-30	1\'-2M	21,20,19,18
3\"	75mm	±8.0	1.4mm-30	2\'-2M	20,19,18,17
4\"	100mm	±8.0	1.6mm-30	2\'-2M	19,18,17,16
Note:1.)The above tolerance comply with standard EN 10223-2:1997. 2.)Minimum Galvanization is only for typical wire diameter as stipulated separately