Delivery Time:15-20DAYS after down payment
Certification:CE, ISO9001-2000

POWER Castle Series Online UPS 6-20KVA,1-1phase and 3-1phase, 192vdc and 240vdc convertible

Introduction:

Power Castle 6K-20Kva, single phase, 3/1phase, is a powerful product range with high adaptability and flexibility. Its cut-edge digital control technology of DSP (Digital Signal Processor), can greatly improve the product performance and system reliability, and deliver a compact integration with higher power density.

 Tailored for AC Grid Environment

Output power factor up to 0.8 – applicable to the tendency of future load evolution, and deliver higher payload capability.

Total power factor up to 90% can minimize the power loss of UPS and utilization cost for user. Active power factor correction (PFC) technology allows the input power factor approaching to 1, dramatically reducing the immunity on utility grid.  Excellent input frequency range makes UPS suitable to different power supply devices, i.e. generator set.

 Flexible Configuration as Demand

 High Scalability: fully meet the customer\'s demands. Online Intervention: safe and online intervention without any power supply interruption to load.

Emergency Power Off (EPO): UPS can be instantly shut off in case of any emergency.

Parallel Kit: realize the parallel extension and redundancy function, offer more flexibility and safety for user\'s power supply planning.

 Compact Design, Lower Noise

 With leading control technology and craftsmanship, this UPS can greatly increase the power density and reduce the footprint, therefore save more expensive space in your office environment. Additionally, its lower noise during operation can allow you a more comfort working environment.

 Perfect failure protection and alarm function: provide complete failure protection and clear alarm notification function in case of I/O over-voltage or under-voltage, battery over-charge or under-voltage, overload, and short circuit.

 High Reliability

 Its cut-edge digital control technology of DSP (Digital Signal Processor) can deliver higher quality, performance and reliability and can be suitable to all severe environments. Higher payload and overload capability, better load compatibility, and suitable for various load type. Powerful Interference immunity capability in compliance with EMC requirements of IEC61000-4, deliver your device a clean electric environment.

Large LCD display with much information and for Easy Maintenance

LCD displays input output voltage, current, frequency, battery condition, load percent, watts , VA, working mode and necessary information;

If any important fault, UPS will detect it automatically and display on the LCD, easy maintenance

192VDC and 240vdc convertible via jumpers, Easy use

Auto Control running fan, 4levels, energy saving

The fan speed auto control running as per the load and temperature by 4 levels

Event log function, 100events, easier for maintenances

Frequency convertor mode

 Rich Communication and Monitoring Features

Provide RS232 interface and communication cable for local ;remote management and monitoring function.(SNMP), CMC, or AS400 card (dry contact)

 Technical Specification

Model	PC06	PC10	PC3110	PC3115	PC3120
Capacity	6KVA/4.8kW	10KVA/8kW	10KVA/8kW	15KVA/12KW	20KVA/16kW
Phase	1/1PHASE, 1wire+N+G	3/1APHASE, 3Wires+N+G
Input  PF	Above0.99
THDi	Less than 6%
Input voltage	Low transfer	L-N:176 VAC ± 3% @ 100% load;130 VAC ± 3% @ 50% load
Low back