PTFE O-ring
Negotiable /Unit
Min.Order:10000 Units
Specification for PTFE O-ring:
PTFE posses an excellent general performance, high temperature resistance, corrosive resistance,
Its density is 2.10g/cm3 ~2.30g/cm3; Tensile strength: 27.6-38Mpa; Elongation at break: ≥238-450%.
Standard: AS, BS,JIS, DIN
Completely seamless and uniform, Teflon PTFE (Polytetrafluoroethylene) O-Rings outperform seals made from most other plastics. This is mainly due to their outstanding endurance of temperature ranges from -325F to 400F (-195C to 204C) and known resistance to highly corrosive gases and chemicals, even with long-term exposure. PTFE has very little mechanical backbone and O-Rings will creep and take a compression set if not contained when placed under a load. When installing, care should be taken to avoid nicking or gouging by stretching over threads or sharp shoulders. Provide corner breaks or radii if possible, or use tools to lead rings over sharp areas. Color: White. Durometer: 70D.