Delivery Time:35days
Certification:API 6D

Multi turn small electric valve actuator accurate valve positioning 24V DC

Non-invasive F-DZW Series multi-turn electric valve actuators are electric valve drive for controlling the valve opening and closing. For gate valves, globe valves, throttle valves, diaphragm valves, which can accurately control the movement command, is the valve to achieve remote control, central control and automatic control of the best drive. This series not only for power stations, can also be used in petrochemical, metallurgy, public utilities and so on.

Technical parameters 

 Ambient temperature -20 ℃ ~ +60 ℃ 

 Humidity ≤ 95% (+25 ℃ pm) 

 Protection class IP55,  IP65 (special order) 

 Repeat accuracy ≤ 7% torque 

 Repeat position deviation ≤ 5 ° 

 Main electrical parameters 

 Power three-phase 380V AC ± 10% 50Hz 

 Type 24-pin connector 6-pin terminal 

 Contact 500VAC/DC 16A 600VAC/DC 35A 

 Conductor cross-section ≤ 2.5mm2 ≤ 6mm2 

 Input / output signal switch input external / internal power supply 

 Voltage 24VDC ± 10% current ≤ 10mA 

 Pulse width:> 100ms 

 Optical isolation 

 Switch output output: 4-way passive contact 

 Capacity: 125VAC/30VDC 5A 

 Position feedback output range: 4 ~ 20mA 

 Load capacity: ≤ 750Ω 

 Linearity: ≤ 0.3% 

Feature
 1. Non-invasive, in situ operation of the device using non-contact sensing element.
 2. Man-machine interface, high brightness, high contrast display, English menu, user-friendly setup and debugging.
 3. Infrared remote control, infrared remote control can be installed on the special position of the actuator for commissioning, operation or parameter settings and queries.
 4. Precise positioning, accurate valve positioning. Digital sensors for precise valve position monitoring.
 5. Control mode, a variety of remote control for users, both internal remote control signals to achieve electrical isolation.
 6. Signal free configuration, up to 4 contact signal output for the user to choose, each channel signal can be freely defined.
 7. Automatic phase sequence correction, the implementing agency to be free to set the rotation, CPU power can automatically correct phase sequence, regardless of when wiring the power phase sequence.
 8. Phase protection, CPU has a power phase and output phase loss protection.
 9. Fault diagnosis, internal CPU constantly implementing agency to collect a variety of information, monitor the operational status of the implementing agencies, through the issue of self-diagnostic alarm and fault information, even if the user to quickly deal with failure.
 10. Emergency operation, priority response \"emergency\" switch in the input signal, once effective, the implementing agency emergency operation to pre-set position.
 11. Convenient debugging, just set the record open and close direction of the terminal location, commissioning work to complete

Specifications

Model	Nominal  torque (N.m)	Maximum  control torque (N.m)	Minimum  control torque (N.m)	Output shaft  revolutions	Allowed to pass  the valve stem  diameter (mm)	Manual  speed	Output  speed (r/min)	Motor  power  (kw)	Weight
F-DZW5A	50	75	≤25	150	28	1∶1	18	0.12	28
F-DZW10A	100	150	≤50	160	24, 36	0.25  0.37	61