Delivery Time:20-30 days
Certification:ISO9001, ISO14001 and OHSAS 18001

5052 H32 Premium Aluminium Sheet Hot Rolled For Trailer And Beverage Cans

Quick Detail:

ALLOY	TEMPER	END USE	THICKNESS(mm)	WIDTH(mm)	SHEET LENGTH(mm)
5052	H32, O, H114,  and others	anodizing, deep draw stock,  tread plates, elastic cap stock,  transportation vehicle, etc.	0.2-100	200--1524	6000mm max.

Description:

1. Machinability

This alloy has relatively fair machinability. It is easier to machine in the hard temper than as annealed and the quality of finish is better if machined in the hard condition. Oil lubricants should be used for machining, except that very light cuts may

2. Forming

AL 5052 is readily formed at room temperature. Successive cold working decreases the formability.

3. Corrosion Resistance

Corrosion resistance to salt water and general atmospheric conditions is good.

4. Welding

This alloy is readily welded by conventional methods. When filler rod is required it should be aluminum alloy 5356 as filler. Either tungsten or consumable electrode inert gas shielded arc welding is preferred method.

5. Heat Treatment

AL 5052 cannot be hardened by means of heat treatment. It does harden due to cold working.

6. Forging

The alloy may be forged in the temperature range of 950 F down to 500 F.

7. Hot Working

Hot working, as with forging, may be done in the range of 950 F to 500 F.

8. Annealing

Anneal at 650 F and air cool.

Product Name	Alloy	Temper	Thickness	Width
Anodized Aluminum Sheet	1060,1070,1100,3003,3004,3005, 5083,5086,5154,6063,7075,8011	H1X,H2X,H3X,O,HXXX	0.20-10mm	600-2000mm
Aluminum Tread Plate	1060,1100,3003,3105, 5052,5083,5754,6061, etc.	H12,H14,H16,H18,H22,H24, H26,H32,H34,H36,H38,O, etc.	1-6mm	1600mm max
Aluminum Checker Plate	1060,1100,3003,3105, 5052,5083,5754,6062, etc.	H12,14,H16,H18,H22,H24, H26,H32,H34,H36,H39,O, etc.	1-7mm	1600mm max
Aluminum Diamond Plate	1060,1100,3003,3105, 5052,5083,5754,6063, etc.	H12,H14,H16,H18,H22,H24, H26,H32,H34,H36,H40,O, etc.	1-8mm	1600mm max
Embossed Aluminum Sheet	1060,1100,3003,5000,2A12, 6061,6063,7075,8011, etc.	T6,O,H12,H14,H16, H18,H22,H24,H32, etc.	0.2-200mm	200-2200mm
Copolymer Coated Aluminum Sheet	1145,8011	soft	0.15-0.20mm (Coating thickness: 0.015mm)	15-2400mm

Manufacturing of Aluminum Sheet:

Ingot + Master Alloy → Melting → Holding Fumace → Continuous Casting → Cold Rolling(Mediate Annealing) → Horizontal shear → Annealing → Aluminum Sheet

Features of 5052 Aluminum Plate: