Round Led Kitchen Cabinet Lights 5v 25MA 2000MCD , 120 Degree
Negotiable
Min.Order:1
Infrared Sensor High Power Led Tube Light Led Cabinet Lights 70Ma For Doorway
1 feet Led Cabinet Light 24v With Infrared Detection For Attic
Wireless Dome Led Kitchen Cabinet Lights 12 Volt For Stairway
IR Sensor Led Kitchen Cabinet Lights Round , 220v 0.015w For Tents
Energy Saving Safe Led Kitchen Cabinet Lights 0.75w For Bookcase
400 - 500 lm Ra90 7 Watt GU10 Led Spotlight With CE , ROHS , SAA
Round Led Kitchen Cabinet Lights 5v 25MA 2000MCD , 120 Degree
Description
It is a piro- sensor automatic product. It can detect the motion of people, and when people enter the
detecting area, it will light on and when people leave it will light off within a delay time. It‘s stable to work
and safe to operate and energy saving to use. It is usually used in the cabinet, wardrobe and corridor.
Quick details
Function and features
1. Automatic induction: when people enter the range of induction, it will light on, when people leave,
it will light off with delay.
2. Automatic random time delay: when the sensor begins to work, and within the delay time, if anyone
enters into the detecting area, the switch will connect automatically, and will not turn off until people l
eave.
3. Built-in high capacity rechargeable battery, and it will keep working even in the condition of power
failure
photo
Specification
Induction mode: infrared sensor
Detecting distance:3m
Induction sensitive Angle: 120
Service time: above 80 thousand hours
Luminance: 2000-2200MCD
Color: white /warm white(optional)
Operating current:25MA
Standby current: 30 ua
Delay time:15seconds
Power: DC5V
Favorable temp & humidity: -5℃-38℃, 5%-93%
Dimension: mm
Storage temp:-10℃-40℃
Instruction
1. Please charge the light with the Mini5pinUSB before installation and it will cost about 1.5 hours to
recharge the battery. The indicator is red when charging and green when finish the charging.
2. Off the base and use the screw to fix the designed location.
3. Put the full charged light into the case, and the magnet will fix the light.pay attention to adjust the
switch to ON.
4. When turn on the light, it need about 10seconds for preheating and then enters operating state.
5. When it powers off, just take off the light and recharge the battery with the USB.
Application
It is wildly used in the cabinet, wardrobe and other place which with small room and is inconvenient for
wiring. It is also widely used in Corridor, stair.
Packaging Details:
Box size:
Net weight:
Gross weight:
Carton size:
Gross weight: 50pcs / carton
Installing Method
Screw fixation
Attentions
1. Never install this light in the place which is damp and with high temperature, which may affect the
normal working of the light.
2. Adopt 5vDC power supply, if it causes any damage by the over high charging voltage and other
artificial reasons, we will not give warranty.
3. Never install the light in the strong light in case affecting the sensitivity or disoperation