Delivery Time:According to the qty
Certification:ISO, GOS, PED

Quick Detail:

High quality TP304,TP304L,TP316L SEAMLESS PIPE/TUBE

Stainless Steel Seamless Pipe, 33.4MM , 42.16MM, 48.26MM, 60.33MM, 73.03MM, 88.9MM, 101.6MM, 114.3MM, 141.3MM, 168.28MM, 219.08MM, 273.05MM, 323.85MM, 355.6MM, 406.4MM, 457MM, 508MM, 609.6MM.  ASTM A511 A312 TP304 TP304L TP304H TP304N PICKLED AND ANNEALED

TP304, TP316L Seamless Tubing, Pickled Annealed Stainless Steel Seamless Pipe

SIZE RANGE :

STEEL TYPES	SIZE RANGE
Stainless steel seamless pipe&tube	OD: 6-830mm        WT: 0.6-60mm
U-Tube	OD: 12-38mm        WT: 0.6-4mm

MAIN STEEL TYPE AND GRADE :

PRODUCTS	TYPICAL STEEL GRADE
Austenitic	TP304,TP304L,TP304H,TP316,TP316L,TP316H,TP316Ti TP321,TP321H,TP347H,904L,TP310H,TP310S,TP317,TP317L
Duplex / Super Duplex	S31803, S32205, S32750

MAIN PRODUCTION STANDARDS:

STANDARD TYPE	STANDARD
EN	EN10216-5 , EN10216-2
DIN	DIN 17456 , DIN 17458
ASTM	ASTM A312, A213, A269, A511, A789, A790 ETC
GOST	GOST 9941 , GOST 5632
JIS	JIS G3459 , JIS G3463
GB	GB/T14975,GB/T14975, GB13296, GB5310, GB9948

PRODUCTION PROCESS:

 

PACKING:

By Bundle	By Wooden Yoke	By Wooden Case

Description:

Mechanical Property	Material Item	304	304L	304	316L	Top Technology
Tensile Strength	≥520	≥485	≥520	≥485
Yield Strength	≥205	≥170	≥205	≥170
Extension	≥35%	≥35%	≥35%	≥35%
Hardness (HV)	<90	<90	<90	<90

Stainless Steel Seamless Pipe:

1.A999/A999M: Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test, the pipe of test to be used shall be at the option of the mfg, unless otherwise specified in the PO.
2. The Pipe lengths : Unless otherwise agreed upon, all size from NPS 1/8” TO AND INCLUDING nps 8 are available in a length up to 24ft with the permitted range of 15 to 24 ft. Short length are acceptable and the number and min, length shall be agreed upon between mfg and purchaser.
3. The finished pipe shall be reasonably straight and shall have workmanlike finish, Removal of imperfections by grinding is permitted, provided the W.T are not decreased to the less than the permitted in Section 9 of Specification A999/A999M
4. Butt Weld End: According to ANSI B 16.25
5. Pipe Marking: Specified in A9