Technical parameter of CMS6000A Three Parameters Patient Monitor

Model of Patient Monitor: CMS-6000A 3 Parameters Patient Monitor

8.4 color TFT display
1. Suitable for adult, pediatric and neonatal patient
2. Basic parameters (ECG, SpO2, NIBP) in a durable case for bedside monitoring and transport
3. Audible and visual alarms with adjustable alarm ranges
4. Networkable with CONTEC central monitoring system
5. Powerful data management and storage capacity

ECG
Lead type: 5-lead
Input: RA; LA; RL; LL; V
Sweep speed: 12.5mm/s, 25mm/s, 50mm/s
Accuracy: (+, -)1bpm or (+, -)1%, whichever is greater
Protection: Withstand 4000VAC/50Hz voltage in isolation against electrosurgical and defibrillation
S-T detection: YES, Arrhythmia analysis: YES
Alarm: YES, audible and visual alarm, alarm events recallable

NIBP
Method: Oscillometry
Operation modes: Manual/Automatic/STAT
Measurement unit: MmHg/KPa selectable
Measurement types: Systolic, Diastolic, Mean
Over-pressure protection: YES

SpO2
Measurement range: 0-100%
Accuracy: (+, -)2digit (70~100%);
0~69% unspecified

Option:
EtCO2
Measurement Mode: Side-stream or mainstream
Measurement range: EtCO2: 0-99mmHg
Accuracy: CO2 concentration
Apnea alarm: YES

IBP
Channel: 2 channels
Pressure transducer: Sensitivity: 5( mV/V/mmHg)
Transducer sites: ART, PA, CVP, RAP, LAP, ICP
Alarm range: -10~300mmHg

Standard Configuration:
ECG, NIBP, SpO2, RESP, 2-TEMP, Network

Optional:
2-IBP, ETCO2, Thermal Recorder