DR AM EAS RF Label For Anti Theft , Low Density Polyester Polyethylene 0.12mm
Negotiable /Piece
Min.Order:1 Piece
QIDA Material & Technology Co., Ltd
58kHz Store Security Soft DR EAS Labels , Electronic Article Surveillance 45mm Length
Anti-Shoplifting Insert DR Label EAS Source Tagging Polyethylene 0.35mm Thickness
Adhesive Barcode AM Hang Jewelry Tag Labels EAS Source Tagging , 58kHz Frequency
58kHz Store Security Soft DR Labels / EAS Source Tagging for Retail Loss Prevention
Low Density Polyethylene 0.12mm EAS Source Tagging / 58kHz Store Security EAS Labels
Store Security Soft DR EAS Source Tagging With 2m ( 8ft ) in Dual Pedestal System
EAS Label
58kHz
plastic housing
label length 45mm ± 0.2mm
label width10.8mm ± 0.2mm
Frequency |
58kHz |
label length |
45mm ± 0.2mm |
label width |
10.8mm ± 0.2mm |
label thickness (excluding liner) |
Maximum1.9mm |
label thickness(including liner) |
Maximum 2.0mm |
Detailed Product Description
sourcing tag
The Q001 Label provides adequate detection and very high deactivation performance.
sourcing tag
Low-price AM labels are available in a wide range of standard and custom styles and are available in sheets and rolls to accommodate retailers with source-tagging and other in-store product protection requirements.
Electrical Specifications
Frequency : 58kHz
Deactivation : 100%
Operating Distance: Up to 2m (8ft) in Dual Pedestal System.
Materials of Construction
1 . Plastic housing
2 . Resonator
3 . Laminate
4 . Bias
5 . Adhesive
6 . Release Liner
plastic housing : Polystyrene/polyethylene 0.35mm thickness.
resonator(s) : Amorphous alloy material.
Laminate : Low Density Polyethylene / Polyester /Polyethylene 0.12mm
Bias : Semi-hard magnetic material
Laminate : Low Density Polyethylene/Polyester 0.08mm
Adhesive : Double-coated acrylic-based adhesive
Minimum peel strength:≥15 N/25mm
release liner : Double-sided, silicon-coated Kraft liner 0.12mm thick
Environmental Constraints
Shelf Life: Two year from date of manufacture when Labels are stored between15-32 (60°F -90°F) and 30-80%RH.
Temperature: Maximum storage temperature not to exceed 50 (122°F) for 96hours at 80% RH.
Humidity: Unaffected by 80% humidity at 50(122°F), up to 96 hours
Usage Instructions
Place in least conspicuous location.
Do not cover warnings, expiration dates or important consumer information.
It is recommended that the surface to which the label is applied be clear and free of all dirt, grease, oil, etc.
Ambient magnetic field of labeled product greater than 100mG may result in reduced label performance.
Label not to exceed temporary magnetic field exposure greater than 8 Gauss.