Fluoroplastic Alloy Sulphuric Acid Magnetic Drive Pump For Chemical Process
Negotiable /Piece
Min.Order:1 Piece
Shenzhen Sinofine Machinery Company
Close Coupled Magnetic Drive Centrifugal Pump For Chemical Circulation 2.2 - 5.5KW
Polyethylene Centrifugal Pumps , Phosphoric Acid Chemical Transfer Pump UHB-ZK
UHB Low Pressure Electric Centrifugal Pump , Industrial Corrosive Liquid Pumps
3KW Fluid Corrosion Chemical Resistant Transfer Pumps For Acid / Alkali 40FSB-30
Close Coupled Chemical Transfer Pumps , Centrifugal Pumps Single-suction 150FSB-32
Sealed Alumina Ceramics Chemical Transfer Pumps With Electric Motor IHF 200-150-400
Fluoroplastic Alloy Sulphuric Acid Magnetic Drive Pump For Chemical Process CQB 16 -12 -50F
Sinofine CQB magnetic pump is mainly consisted of motor, magnetic coupling and anticorrosive centrifugal pump. When motor drives the external magnet steel of magnetic coupling to rotate, the magnetic force line passes through the clearance and spacer sleeve to act on the internal magnet steel, making the rotor and motor rotating synchronously, thus to transfer the torque with out any mechanical contact. At the end of dynamic input of pump shaft, as liquid has been enclosed in the stationary spacer sleeve without dynamic seal, thus to actualize complete leak tightness.CQB series centrifugal pump are used to move liquid through a piping system for food, chemical, water treatment and wastewater applications, among others. The liquid enters the centrifugal pump, where it goes onto an impeller that flings the liquid out and away, changing the fluid direction, causing acceleration and thereby increasing pressure. Centrifugal pumps keep liquids moving continuously for transporting, removing, loading and elevating fluids.
Sinofine CQB magnetic pump is widely used in the fields of chemical, pharmaceuticals, petroleum, foodstuff, movie and picture developing and printing to deliver acidic and alkaline liquid,oil, rare precious liquid, poisonous liquid and volatile liquid.Sinofine CQB magnetic pump is made of engineering plastic, also CQ pump can be made in many materials such as: Stainless steel, fluorin plastic, cast iron. CQB magnetic pump has static seal instead of dynamic seal, thus to make the components in contact with flow fully enclosed to get away from the problems of emitting and dripping borne by mechanical seal.The material for the main parts is high-strength engineering plastic, corundum ceramics and stainless steel. Capacity:0.5 to 800m3/h, head:5 to 50m. (special demand can be negotiated).In the driving device the initiative magnet junction box is directly installed onto the motor shaft. The pump chamber is totally sealed, and is propelled to rotate by the magnetic impeller on the magnetic coupling indirect driving pump shaft, its structure tight, safe, and energy-saving.
Model Significance:
CQB 16 -12 -50F
CQB - Centrifugal pump driven by CQB magnetic
16 - The pump’s inlet diameter is 16mm
12 - The inlet diameter is 12mm
50 - The impeller’s nominal diameter is 50mm
F- The material of the liquid carrying part is fluoroplastic alloy
Model |
Flow m3/h |
Lift m |
Efficiency % |
NPSh m |
Inlet XOutlet mm |
Speed r/min |
Motor Power kw |
Weight kg |
CQB50-32-160FA |
7 |
33 |
30 |
3.5 |
50X32 |
2900 |
4.0 |
140 |
* 12.5 |
32 |
39 |
||||||
15 |
29 |
41 |
||||||
CQB50.32-200FA |
7 |
52 |
20 |
3.5 |
50x32 |
2900 |
7.5 |
210 |
* 12.5 |
50 |
31 |
||||||
15 |
48 |
35 |
||||||
CQB65-50-125FL |
15 |
22 |
46 |
3.5 |