Preformed Suspension Clamp For ADSS , Transmission Line Fittings
Negotiable /Set
Min.Order:1 Set
Renqiu Rollas Import And Export Trade Co., Ltd.
Transmission Line Fittings Galvanized Steel Linear / Angle Cross Arm
Porcelain & Steel Suspension Insulator , 25kv Composite Cap And Pin Type
132kV High Voltage Cap And Pin Type Suspension Type Insulators
Silicone Rubber Composite Suspension Type Insulators 1KV - 500KV
End Fitting Suspension Type Insulators , Electricity Safty Insulator
Preformed Suspension Clamp For ADSS , Transmission Line Fittings
Quick Detail:
suspension clamp Double Suspension Sets for ADSS High intensity;
Well corrosion resistance;
Easy installation
Component |
Preformed wire,rubber insert ,casting aluminium suspension splint. |
Usage |
1, Supporting,make ADSS cable hang on the pole and tower. 2,Suggested to use within the span no more than 150 miles and intersection angle no more than 15°. |
Description:
The FIBERLIGN Dielectric Suspension is specifically designed for installation on ADSS cables and is different than FIBERLIGN Suspension for OPGW. Due to the relatively fragile nature of the plastic jackets and nonmetallic strength members of ADSS, special care and features are incorporated into the design. FIBERLIGN Dielectric Suspension for ADSS is intended for long spans where suspension is desired regardless of span, where very high unbalanced longitudinal holding strengths are desired or where very high veritcal loads are expected. Call for ordering instructions.
Usage:
Optical fiber cable fitting is a kind of line products used for installing support and protection of OPGW & ADSS cable.
1.OPGW Suspension set
2.ADSS Suspension set
Applications:
Suspension clamp widely used in overhead lines fittings and substations,connecting with overhead ground wire,insulator,on the equipment .It incluses a series of type, such as the type with clevis,abrasion proof type, corona proof type,hang up or down envelope type.the material can be Malleable cast-iron or aluminum alloy.
As the suspension clamps are used to AAC and ACSR,the conductor may be wound by aluminium taps or preformed armour rods for protecting these taps or rods are included in the diameter of suitable conductor.
Specifications: