3 Axis CNC Bevel Gear Generator For Spiral Bevel gear , Cutter Diameter 6″ , 9″ , 12″

Quick Detail:

This is a new type of CNC machine developed on the base of YT2250 Spiral Bevel Gear Generator.

It is used to cut the gears from the small one of 25 mm in diameter and 2.5 mm in module up

to the large one of 500 mm in diameter and 10 mm in module. The machine is designed for roughing and finishing Spiral Bevel Gears, Hypoid Gears, Angular Bevel Gears, Pinions which are meshed with non-generated gears and gears with long cone distance used in automobile, construction machinery, aviation and machine tool industries. It is most suitable for batch production as well as suitable for mass or jobbing production.

Description:

1)The machine is designed to operate as a three-axes CNC control Spiral Bevel Gear Generator, i.e. cradle oscillation (X axis), work spindle rotation (Y axis) and sliding base movement (Z axis) being simultaneously controlled by control system for cutting the gears. The rotation of cutter spindle is controlled by a frequency variable motor for its stepless control.
2)There are no any change gears on the machine for easy operation, variety application and minimizing the setting time of machine. The machine settings calculated for YT2250 or Y225 machine can be converted into the relative machine settings of YKT2250 machine.
3)When setting the cutter by hand, the power of main motor will be off, so as to protect the operation. Three axes(X, Y and Z) will be back to zero positions through switches for ensuring the high accuracy and there are forward and backward limit switches for Z axis.
4)A high precision worm gear set is used for cradle drive and work spindle drive respectively, which are controlled by AC servo system for getting high machining accuracy. The machine is with higher structural and driving rigidities.
5)The machine is equipped will CNC control system 802D (SIEMENS), AC digital servo system and frequency variable regulator to accomplish the automatic or manual control and fault defect.
6)The machine is equipped with an independent sealed electrical cabinet, which is with air conditioner or thermo exchanger.
7)Safety guards and auto-chip conveyor can be provided on the machine.

Specifications:

Main Specifications of Machine
1) Dimensions of work to be cut
Max. module 10mm
Max. pitch cone distance (spiral angle 30°) 260mm
Max. pitch diameter (spiral angle 30°,ratio10:1)500mm
Root angel Max. 5°
Min.
Max. ratio (shaft angle 90°) 10:1
Max. spiral angle 50°
Max. cutting depth 20mm
Max. face width 70mm
Max. number of teeth 5-1000
2)work spindle
Diameter of taper hole at large end 100mm
Taper 1:20
Length of taper 160mm
Diameter of through hole 78mm
Face diameter 170mm
3)Cutter Diameter 6″, 9″, 12″
4)Workhead settings
Max. offset of spindle
Upward from center position 60mm
Downward fro center position (When the distance from face of spindle to machinecenter being at 

＜14510mm ＞145 50mm
Distance from face of spindle to machine center70-350mm
5)Cutter speed ( stepless) 31-120rpm
Power of main motor 7.5kw
6)Cradle settings
Setting angle 0°-360°
Setting angle of eccentric drum 0°-125°
7. Sliding Base
Max. movement from machine center Forward 25mm
backward 163mm
8)Net weight 6200kg
9)Overall dimensions 2900X2200X1825mm
10)Total power of motors 25kw