Delivery Time:5-10 days
Certification:CE,ISO

Automatic Stainless Steel Air Shower Pass Box for Lab Rooms , 900×780×860mm

Quick Detail:

1.Name: YJ-S-500 Stainless Steel electronic interlocking pass box

2. Brand Name: YIJING

3. Material: All full set Stainless Steel SUS304

4. Feature: Automatic Control

5. Outside dimension: 900×780×860 (mm)

6. Certificates: CE,ISO

Description:

1.The stainless steel clean room pass box adopts the SUS304 stainless steel as the material for interior and exterior product body and the two doors. The thickness of the stainless steel is 1.0mm. Meanwhile, the product is equipped with the Taihu ultraviolet lamp with the power of 10W and the wavelength of 254nm.

2. It can get the ideal sterilization effect. In addition, the embedded type installation of ultraviolet lamp can reduce the contact possibility of delivered articles and ultraviolet lamp tube to ensure safe use.

3. Stainless Steel Short distance pass box.

4.Mechanical interlock or electronic interlocking both with inside and outside door.

5.High Wind velocity of nozzles.

6.High filtration efficiency HEPA filter.

7.High EVA sealing material.

8.Options for call-in radio.

9.Multi-Customized.

How to use Pass Box?

The cleanliness level of pass box is managed associated with a higher level of clean areas, such as: The pass box between code-spurting area and filling area should be managed as per the requirements of filling area. It is used by the operator of clean area,

swabbing the inside of each area of pass box, then opening the UV sterilization lamp for 30 minutes.

When the raw materials in and out of the clean area, which must be separated with person flow channel, out and exit by special raw material channel. When the material enters, raw materials preparation classes by the person in charge of personnel processes or exterior cleaning off the package, sent by inter- plant transfer window temporary raw materials; temporary package material between the outer packaging removed after passing through window into the private rooms. Comprehensive workshop staff is responsible for packaging and transferring materials . When passing goods by the pass box, we must strictly comply with the regulation \" opening and closing \", two doors can not be opened. Open the outer door after the material is passed, then open the inner door and take out the materials, then closed again. When sending material out of the clean area, they should be delivered to the first materials intermediate station, then take out of the clean room as per the opposite process. All semi-finished products must passed out of the pass box through the clean room to the temporary storage room and transported to the packaging room through the logistics channels. Highly pollution materials and waste should be transported from the pass box to the non- clean area. After the material is finished al in and out process, the site should be cleaned from time to time in the middle of each package station clean package and pass box, close the inside and outside door of pass box, cleaning and disinfection must be done.

Applications: 

 As an auxiliary device of clean room, the pass box is mainly used to deliver small items between clean area and clean area , non-clean area and clean area, reducing the times of door open, maximum reducing the pollution of clean room.

Pass box is widely used in the place where need purification of micro- technology, biotechnology laboratories, pharmaceutical plants, hospitals, food processing industry , LCD, electronics factory , etc.

Specifications

Type	Outside Dimension (W×D×H) (mm)	Inside Dimension (W×D×H) (mm)	Remark
1	500×420×520	300×300×300	Electronic Interlocking and Full Stainless Steel
2	600×520×620	400×400×400
3	700×620×720	500×500×500
4	800×720×820	600×600×600
5	900×820×920