Electrical Interface 850 nm VCSEL 10Gigabit SFP+ Optical transceiver 300m , PIN photo - detector
Negotiable /Set
Min.Order:1 Set
Shenzhen SOT Technology Co., Ltd.
Juniper Networks Ex-Sfp-10ge-Er SFP + Optical Transceiver For 10gbase-Er / Ew / 10g Fiber Channel
High Performance 100MB 155Mbps 40km SFP Optical Transceiver For SONET OC-3 IR1 / LR1 / LR2
Dell 1000Base - LX SFP Optical Transceiver , 1310nm FP Laser / PIN Photodetector For 2km / 10km / 20
1.25G / 2.5G 20km SFP Optical Transceiver With Dual Fiber / Lc Connecter , 1270nm - 1610nm Wavelengt
10 / 7Gbps Bidirectional Data Links BIDI SFP+ Transceiver Compliant With SFP+ MSA Duplex LC Connecto
Cisco FE 10km TX1310nm / RX1490nm 155Mbps BIDI SFP Transceiver Compatible GLC-FE-100BX-U
Electrical Interface 850 nm VCSEL 10Gigabit SFP+ Optical transceiver 300m , PIN photo - detector
Specifications Optical interface compliant to IEEE 802.3ae 10GBASE-SR10Gbps SFP+ Optical Transceiver, 300m Reach
Features
Optical interface compliant to IEEE 802.3ae 10GBASE-SR
Electrical interface compliant to SFF-8431
Hot Pluggable
850nm VCSEL transmitter, PIN photo-detector
Maximum link length of 300m on 2000MHz/km MMF
Operating case temperature: 0 to 70°C
Low power consumption
All-metal housing for superior EMI performance
Advanced firmware allow customer system encryption information to be stored in transceiver
Cost effective SFP+ solution, enables higher port densities and greater bandwidth
Applications
10GBASE-SR at 10.3125Gbps
10GBASE-SW at 9.953Gbps
Other optical links
Description
This 850 nm VCSEL 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over 50/125 μm or 62.5/125 μm multimode optical fiber
The SFP+ SR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled.
The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
Type | JUNIPER networks Compatible Model | Description |
EX series FP+/XFP 10GB |
EX-SFP-10GE-DAC-1M | SFP+ 10 Gigabit Ethernet Direct Attach Copper (twinax copper cable) 1m |
EX-SFP-10GE-DAC-3M | SFP+ 10 Gigabit Ethernet Direct Attach Copper (twinax copper cable) 3m | |
EX-SFP-10GE-DAC-5M | SFP+ 10 Gigabit Ethernet Direct Attach Copper (twinax copper cable) 5m | |
EX-SFP-10GE-DAC-7M | SFP+ 10 Gigabit Ethernet Direct Attach Copper (twinax copper cable) 7m | |
EX-SFP-10GE-ER | SFP+ 10GBase-ER 10 Gigabit Ethernet Optics, 1550nm for 40km transmission on SMF | |
EX-SFP-10GE-LR | SFP+ 10GBase-LR 10 Gigabit Ethernet Optics, 1310nm for 10km transmission on SMF | |
EX-SFP-10GE-LRM | SFP+ 10 Gigabit Ethernet LRM Optics, 1310nm for 220m transmission on MMF | |
EX-SFP-10GE-SR | SFP+ 10GBase-SR 10 Gigabit Ethernet Optics, 850nm for up to 300m transmission on MMF | |
EX-SFP-10GE-USR | SFP+ 10 Gigabit Ethernet Ultra Short Reach Optics, 850 nm for 10m on OM1, 20m on OM2, 100m on OM3 multi-mode fiber | |
EX-XFP-10GE-ER | XFP 10GBase-ER 10 Gigabit Ethernet Optics Module, 1550nm for 40km transmission on SMF | |
EX-XFP-10GE-LR | XFP 10GBase-LR 10 Gigabit Ethernet Optics Module, 1310nm for 10km transmission on SMF | |
EX-XFP-10GE-SR | XFP 10GBase-SR 10 Gigabit Ethernet Optics Module. 850nm for up to 300m transmission on MMF | |
EX-XFP-10GE-ZR | XFP 10GBase-ZR 10 Gigabit Ethernet Optics Module, 1550nm for 80km transmission on SMF |