1.Application: compressing waterproof connectors

2.Supply Type: OEM

Description:

The compression tool T5010 is for compressing waterproof connectors. It connects radial connectors to coaxial cable. And it customizes the length of cable used to connect components.

Instructions:

Step 1:

1) Trim back the outer jacket approximately 1/2”

2) Trim the braided wire to approximately 1/4” length and fold it back over the outer jacket

3) Remove approximately 1/4” from the dielectric. This should leave approximately 1/4” of center conductor exposed and 1/4” of the dielectric exposed. Please review the diagram as shown.

Step 2:

Insert the stripped cable into the connector. Push until dielectric rests against the bottom of the relating ring inside the connector.

Step 3:

Place the connector with cable into the tool’s holder.

Step 4:

Squeeze the handles.

Step 5:

Remove the compressed connector from the tool.

For example, it can be used for our F connector model No.CT5083/RG59.

Size: 125*58*20mm(L*W*H)

Net Weight: 256g(280g including blister packing)