Mining grouting pump
Product Introduction
Mining grouting pump have the advantage of low energy consumption, small vibration, low noise, small size, high efficiency, reliable performance, pressure and flow control, long life and so on. Common mine grouting pump are: pneumatic injection pump, dual fluid injection pump, extrusion injection pump and piston injection pump.
Feature
1.Grouting pump should have a larger discharge plasma volume adjustment range .Generally the amount of the final grouting grouting volume changes began about 8 to 10 times. The end of a small amount of grouting proved well compacted fill.
2.Grouting pump should have a reliable pressure control. Because grouting "fill compaction" inevitably result in overpressure grouting pump, then pump discharge plasma should be promptly reduced the amount of slurry to reduce the flow resistance in the gap and thus avoid fracturing grouting, road bumps , machinery accidents and so on. Grouting injection pump preferably has a pressure change over automatically adjust the performance of row plasma volume .
3.Grouting pump operation and maintenance should be simple, safe and reliable. Because slurry grouting pump is easy to use precipitation, coagulation,.Grouting pump must ensure that each grouting shall not pause halfway (before grouting should do preventive maintenance). Mine operating under difficult conditions, grouting pump must use reliable, absolute explosion-proof .
Scope of application
Widely used in:
1. in construction for vertical and horizontal conveying mortar.
2. in the iron and steel metallurgy sector for the maintenance of the blast furnace and other equipment.
3.in the defense engineering, civil air defense engineering and mining, tunnel construction for grouting.
4. in the chemical sector used to transport slurry materials (colorants, coatings), magnetic materials and other media.
5.in the farmland water conservancy projects, used to reinforce the dam. Sand wells used to reinforce wall and so on.
6. in the railway construction for bridges, culverts grouting.
7. in the thermal power plant fly ash for conveying mortar.
8. prestressed member works for mortar injection dilation.
9. in the highway pavement maintenance for cement concrete pavement void beneath grouting.
