Plastic Pipe Extrusion Line , HDPE Silicone Core Pipe Production Line
 
The HDPE silicone core pipe production line is mechanotronics, with the advantages of:
1) novel structure;
2) convenient operation;
3) high automation
4) constantly production with stability and reliability etc.
 
 
 
Description:
extrusion, extrusion line, production line, making machine, production machine, pipe line, pipe making machine, pipe extrusion line, pipe production line, HDPE pipe extrusion line

HDPE silicone core pipe extrusion line is the best choice for high way cable protect with its good physical and chemical properties with low price, convenient construction. 
The HDPE Silicon core pipe production machine, which was developed from the latest technique, absorbed experience both home and abroad, has novel structure, convenient operation, high automation, constantly production with stability and reliability. This line is co-extruded by three extruders, the core layer is Silica blended with HDPE, and the outer layer is HDPE and has marking line.
 
 
Specifications:
 

 
 
 
Applications:
This HDPE silicon core pipe making machine can produce HDPE silicon core pipe,which is a kind of wall with silica gel mass solid lubricant of new composite pipe, referred to as the \"silicon tube\". The three sets of plastic for resisting Japan and saving the nation out of the machine synchronous extrusion compound and into. The main raw materials for high density polyethylene (HDPE), core layer for friction coefficient of the lowest solid lubricant silica gel mass. Should be widely for optical cable network communication system.

 
 
 
Competitive Advantage:
The main extruder is high efficient screw extruder, it adopts co-extrusion spiral die, haul-off motor adopts frequency control system with stability and reliability, the line adopted PLC control system, realized each function modularization, and has high control precision.
 
1. Barrier type screw, by which the material can get good plasticizing at low temperature but high extrusion output.
2. Barrel with feeding groove, material is 38CrMoAl and nitrogen treated, surface hardness is HRC 65-68, which can has a long use life.
3. Millipore type mould with suitable inner compression ratio which can guarantee to produce high quality PPR pipes.
4. High automatic level. The production line is controlled by PLC(touch screen). All parts, like extruder, haul off unit, cutter etc can be controlled by touch screen synchronously. Extruder mold