Delivery Time:A week after confirmed payment
Certification:CE ISO9001:2008

Series Resonance Induction PWHT Machine , Induction Forging Heater

Quick Detail:

Type:Other

Place of Origin:China (Mainland)

Brand Name:Canroon

Model Number:CR2000-080A-14T

Voltage:380V

Current:53A

Rated Capacity:35KW

Rated Duty Cycle:35KW

Dimensions:880*663*982

Weight:201Kg

Usage:induction temperature stress relievers

Certification:CE ISO9001:2008

After-sales Service Provided:Overseas service center available

Process:Induction heating equipment

Input Power:380V,3-Phase

Temperature recorder:6 Channel temperature recorde

Description:

The new induction preheater CR2000 can be used as an air-cooled system for temperatures up to 1450º F . The preheater features multiple outputs, six control thermocouples to ensure uniform heating, significantly faster time to temperature than conventional heating, and an extremely easy-to-use operator interface that allows the operator to program ramp and hold temperature times. It also tutors the operator to achieve maximum output from the induction coils.

Applications:

With the introduction of the Induction PWHT Heating , this simple and cost-effective heating process can be applied in the following applications to deliver fast and consistent heat:

Welding fabrication and construction; Preheating of welds; Post-weld heat treatment; Coating removal; Shrink Fit and so on

Specifications:

Input Amperes at Rated Output	380V:53A
Thermal conversion efficiency	More than 90%
Maximum Rated output	35KW
Cooling Mode	Air cooled
Input Power	380V 3-Phase,50HZ
Rated Output	35KW at 100% duty cycle,1-35KHZ
TC input	6 circuit
Digital Recorder	Optional
Control Model	Digital Control
Resonance	Series Resonance
Temperature	Max 1450°F
Dimensions	H:880MM W:663MM D:982MM
Transportation	By sea or By Air
Weight	201KG
Warranty	12 Months

Competitive Advantage:

1.Versatile Mobility:optional running gear designed for construction and maintenance
2.On-board temperature control:provide for manual or temperature based programming in a simple-to-learn operator interface
3.Muitiple control thermocouple inputs:available to control on the hottest TC during heating and coolest TC during cooling for
4.uniform heating and quanlity
5.Open output detection:prevents system operation without a covered output receptacle(cable or protective plug)
6.Isolation fault protection:provides automatic system shut down power source output to ground.
7.Low consumable costs:No fuel costs and minimal insulation costs.insulation is resuable and may be used 50 time or more,reducing costs of disposal and replacement.
8.Uniform heating:maintained along and through the heat zone by using induction to heat within the material.the surface of the part is nor marred by localized conducted heat at higher than specified temperatutes.
9.Time-to-temperature:faster than conventional processes due to methed of applying the heat,reducing the heating heating recyle time.
10.Improved working environment: With welding,welders are not exposed to open flame,explosive gases and hot elements associated with fuel gas heating and resistance heating.
11.High energy-efficeent systems:(more than 90 percent efficient)transfers more energy to the part,decreassing heating times and impoving power efficietnt.
12.Easy Set