Compact Slickline Valve/ Manual&Hydaulic Control Ram BOP

The BOP is used for sealing the wellhead to prevent well blowout accidents in logging operation when there are accidents and there are cables in the well. The BOP has simple structure, convenient application and maintenance, small volume, light weight, high pressure bearing, hydraulic remote control and simple and reliable operation.
The BOP is mainly composed of main casing, and ram assembly piston, hydraulic cylinder, lead screw, end cap, hand wheel and other spare parts, which are moving in the main casing in opposite direction. When the well needs to be sealed, the hydraulic control and grease injection pressure control system is pressurized to push the piston, thereby leading the two ram bodies to move towards the center of the well bore, and well sealing can be achieved through the associative action of the front rubber sealing element and the top sealing rubber. The ram can be locked on the shut-in position through clockwise rotating the locking hand wheel. What be specially noticed is that before the well is opened, the locking hand wheel must be anticlockwise rotated, the hydraulic control system can be used for pressurizing after the hand wheel is totally receded to the initial position, the piston is hydraulically pushed to led the two rams to rearwards move, and then, the well can be opened. It should be guaranteed to open the full i.d. to prevent the instruments and the ram from colliding when the well is opened.

Manual Control Single Ram BOP

Hydraulic Control Single Ram BOP

Hydraulic Control Dual Ram BOP

   Note: There are Bowen and Otis quick union for all threaded selective.