Delivery Time:To be advised
Certification:ISO9001 TS16949
Black PBT Wire Active Piezoelectric Buzzer 12V D30MMxH20MM
Quick Detail:
Size: D30mm*H20mm SPL: Min.90dB at 2.8KHz/12VDC 1/2 Duty Square Wave/30cm Operating Voltage: 5-15VDC Resonant Frequency: 2800500Hz ContinuousDescription:
buzzer Piezo Buzzer with build-in oscillating Piezo Buzzer with Wire 12V Buzzer 30mm Piezo Buzzer Wire length can be customizedSpecification:
1. Technical Parameter
Measuring condition
Part shall be measured under a condition (Temperature: 5～35℃, Humidity: 45%～85%R.H., Atmospheric pressure: 860 ～1060hPa) unless the standard condition (Temperature: 25±3℃, Humidity: 60±10%R.H. Atmospheric pressure: 860 ～1060hPa) is regulated to measure.
|
1 |
Rated Voltage |
12 VDC |
|
2 |
Operating Voltage |
5 – 15VDC |
|
3 |
Rated Current |
Max.30mA, at 12VDC |
|
4 |
Sound Output at 30cm |
Min.90dB, at 12VDC |
|
5 |
Resonant Frequency |
2800±500 Hz |
|
6 |
Tone |
Continuous |
|
7 |
Operating Temperature |
-20 - +70℃ |
|
8 |
Storage Temperature |
-30 - +80℃ |
|
9 |
RoHS |
Yes |
|
10 |
Weight |
Approx 7 g |
*Housing Material: Black PBT
3. Reliability Test
After any following tests the part shall meet specifications without any degradation in
appearance and performance except SPL. SPL shall not deviate more than -10 dB
from the initial value
(1)Ordinary Temperature Life Test
The part shall be subjected to 96 hours at 25±10℃. Input rated voltage
Resonant frequency, 1/2 duty Square wave.
(2)High Temperature Test
The part shall be capable of with standing a storage temperature of +80℃ for 96 hours.
(3)Low Temperature Test
The part shall be capable of with standing a storage temperature of -30℃ for 96 hours.
(4)Humidity Test
Temperature:+40℃±3℃ Relative Humidity:90%～95% Duration: 48 hours
and expose to room temperature for 6 hours
(5)Temperature Shock Test
Temperature:70℃ /1hour→ 25℃/3hours→-30℃/1hour→ 25℃/3hours (1cycle)
Total cycle: 10 cycles
(6)Drop Test
Standard Packaging From 75mm(Drop on hard wood or board of 5cm thick,
three sides, six plain.)
(7)Vibration Test
Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes
Note:
As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it
4.Electrical And Acoustical Measuring Condition
Recommended Setting
Recommended Test Circuit
Application:
CHANGZHOU FHD ELECTRONICS CO., LTD is a professional manufacturer in the field of micro acoustic products , our products is widely used in household electrical appliances; mobile phones; computers; medical equipment; alarm system; pos machine ；access contr
