Delivery Time:20 days
Certification:CE

2A AC Automatic Fast Lead Acid Battery Charger , 10Ah - 16Ah

Name: SLA battery charger, Gel cell, automatic battery charger,  fast battery charger Input:100-240Vac 50-60Hz 1.0A IEC C8 input connector or directly plug in Output:12.0Vdc charging current:2.0A Suitable battery capacity:  10Ah to 16Ah Plug: US/UK/EU AC input Feature: high frequency, Short circuit protection, Over voltage protection, Constant current, 3-stages charging Mode, CE approved Application: GEN CELL, SLA battery, Lead acid battery, Airsoft gun, RC Car, RC toy, E-bike, RC Air plane, Diving light, Bicycle, Power tool, Halogen bike light battery, Bath lift, Pillow lift, Toilet lift, LED Light Efficiency: 80%(min) Dimension: 115.0*47.0*34.0mm

Quick Detail:

12V 2.0A lead acid battery charger

Description:

Universal Smart Charger for 12.0V Lead-Acid battery pack
suitable battery capacity 10Ah to 16Ah
.3-stages charging mode
 1.Constant current
    2.0A
 2.Constant voltage
    14.3-14.7Vdc;
 3.Floating voltage
    13.5-13.8Vdc;
.Led indicate charging status:
  Red---in charging; Green---fully charged
.Safety protection
 Short circuit protection
 Battery Polarity errror protection
 Over voltage protection
.Input:100-240Vac 50-60Hz 1.0A
 IEC C8 input connector or directly plug in
.Output:12.0Vdc charging current:2.0A
.Dimension:115.0*47.0*34.0mm

Applications:

GEN CELL, SLA battery, Lead acid battery, Airsoft gun, RC Car, RC toy, E-bike, RC Air plane, Diving light, Bicycle, Power tool, Halogen bike light battery, Bath lift, Pillow lift, Toilet lift, LED Light

Specifications:

	ITEM	UNIT	SPECIFICATION	REMARK
INPUT
01	Rating Input Voltage	V ac	100~240Vac 50-60Hz
02	Input voltage range	V ac	90~264Vac
OUTPUT
03	Rating output voltage	V dc	13.8V
04	Output voltage range	V dc	10VDC~15VDC
05	Charging current(stage1)	A	2A±0.2@12V
06	Charging voltage(stage2)	V	14.5V+-0.2V
07	Floating   voltage(stage3)	V	13.7V+-0.20V
08	Cut-off current(stage2→3)	A	0.2+-0.05A
09	Typical charging time	hour	8
10	Hold-on time	ms	NC	Input:220Vac Output:Full load
11	Ripple current	mA	80	Input:220Vac Output:Full load
12	Charge finish condition		V>14V +I<0.2A