Processing material and workpieces of machine:

1. The Edge Bander can finish wooden edge frames at straight edge, inside the arc,outside the arc,curve and circle, the radius of the inside arc above 15mm

2. The Edge Bander can finish all kinds of wooden edge frames which can be glued with hot-melt glue such as wood, particleboard, medium density fiberboard(MDF) and particle board and so on.

3. The Portable Edge Bander are using many types of banding at a wide range of widths and thickness, the banding material can be melamine paper banding, wooden veneer, vinyl(PVC or ABS) self-adhensive edge banding. The thickness of the edge banding within 0.3mm to 3.0mm. The edge band’s minimum/maximum width is 10mm to 40mm.

4. The Portable Edge Bander is suitable for medium to low temperature hot melt adhensives(melting point below 200℃). The temperature of the tank can be controlled with adjustable temperature control according to different banding thickness and material. The warm up time takes only 10 to 15minutes.