SYZ steel-on-steel rod ends: Features: 1) SYZ steel-on-steel rod ends comprise a rod end and a steel-on-steel spherical plain bearing of series GE-E, GE-ES, GEG-E and GEG-ES, or a rod end and a spherical plain bearing inner ring 2) The bearings are held in position in the housing bore axially either by staking or by a retaining ring on both sides 3) Rod end of series SI(A)-E and SI(A)-ES is made of carbon steel, zinc coated to protect against corrosion 4) Rod end of series SI(A)ZJ is made of carbon steel, zinc coated to protect against corrosion, inner ring of carbon chromium steel, hardened, sliding surface treated with chromium plating 5) Rod end of series SIGEW-ES, SIR-ES and SIQ-ES are available up to a nominal size of 50mm, made from carbon steel and as of nominal size 60mm from spheroidal graphite cast iron or cast steel, with slot in the shank, and can be clamped firmly by 2 hexagon socket screws 6) Rod end of series SK-ES and SF-ES is made of weldable steel, to facilitate centring rods of series SK-ES on other components, they are provided with a dowel pin 7) All SYZ steel-on-steel rod ends can be re-lubricated via a nipple or a hole in the rod end SYZ steel-on-bronze rod ends: Features: 1) SYZ steel-on-bronze rod ends comprise a rod end, a spherical plain bearing inner ring and bronze liner 2) Rod end is made of carbon steel, zinc coated to protect against corrosion; inner ring of carbon chromium steel, hardened, sliding surface treated with chromium plating 3) SYZ steel-on-bronze rod ends can be re-lubricated via a nipple or a hole in the rod end SYZ steel-on-PTFE composite material rod ends: Features: 1) SYZ steel-on-PTFE composite material rod ends comprise a rod end and a steel-on- PTFE composite material spherical plain bearing 2) The bearings are held in position in the housing bore axially by staking on both sides 3) Rod end is made of carbon steel, zinc coated to protect against corrosion; inner ring of carbon chromium steel, hardened, sliding surface treated with chromium plating 4) Rod ends of series SI (A)-C comprise a rod end and a steel-on-PTFE composite material spherical plain bearing of series GE-C, outer ring of series SI(A)JK-C and SI(A)K-C is made of brass SYZ steel-on-PTFE fabric rod ends: Features: 1) SYZ steel-on-PTFE fabric rod ends comprise a rod end and a steel-on-PTFE fabric spherical plain bearing of series GE-ET-2RS 2) The bearings are held in position in the housing bore axially by staking on both sides 3) Rod end is made of carbon steel, zinc coated to protect against corrosion 4) Hydraulic rod ends: SK-E, SK-ES, SF-ES, SIR-ES, SIGEW-ES, SIQ-E, SIQ-ES