China shearing machine
1. The frame is steel welded structure, have sufficient strength and rigidity, eliminate internal stress and high frequency vibration, to ensure the overall accuracy of the fuselage. Has a good rigidity, two cylinders fixed on the left and right columns (wallboard).
2 .Tool carrier for welded steel plate box-type structure, has a good rigidity, high-frequency vibration to eliminate internal stress, through the rear pivot point gap adjustment device for the center, and can quickly adjust the blade gap. Three-point support rolling clamping rail, and to maintain good accuracy, the tool carrier running smoothly, and can quickly adjust the blade gap.
3. Shearing machine blades, four blade edges can be used, our blades is shanghai brand, just 3/1000 feedback, long service life.
5 Shearing machine blades using 6CrW2Si, high quality materials, and all heat-treated, to ensure that it has sufficient hardness and long service life.
6. E20 NC system can be digital display, also can be simple locate and control back gauge. Our E20 NC control panel display shear angle.
7. QC11Y hydraulic guillotine shearing machine can be adjusted shear angle and blade gap. QC12Y hydraulic swing beam shearing machine just be adjusted blade gap.
Shear Max Thickness  mm 4
Max width mm 2500
Travel times times/min ≥18
Stopper adjust range mm  600
Cutting angle ° 0.5-2.
worktable height mm  750
Throat depth mm  100
power KW  5.5
Dimension(L x W x H) mm 3130x1500x2070
weight kg  4000