Single phase AC Thermal Protector / overload protector switch / motor circuit protection with solid
Negotiable /Set
Min.Order:1 Set
Jiangsu ChangSheng Electric Appliance Co.,Ltd
Auto manual AC Thermal Protector / Snapaction disc motor thermal cutout switch / thermal cutout swi
BR-B5D 50 to 150 Plastic Case small AC Thermal Protector / thermal overload protection for motors
250V / 7A AC Thermal Protector / motor circuit protectors, BR-B6D battery protector with plastic hou
250V / 5A and 95 Plastic Case featured AC Thermal Protector, Thermal Cut-Outs and circuit thermosta
120 Snapaction disc and single phase motor thermal protection switch and Thermal Overload Protecto
BR-A1D 55 metal case single phase circuit protector, Thermal Overload Protector and motor circuit p
Single phase AC Thermal Protector / overload protector switch / motor circuit protection with solid cable for PCB
Description:
Changsheng BR-B2D series motor protector is built to meet almost any requirement of protection in a wide range of small motors, small transformers, solenoids, and more. This compact motor protector is the best solution to protect the wide variety of motors under 1 Hp used in industrial and domestic appliances against locked rotor and overload situations.
This motor protector consists of a plastic PBT housing that holds and protects the inner components against infiltration as well as mechanical deformation. In single–phase motors, the BR-B2D can be mounted directly in the main circuit to serve as an on– or in–winding protector.
Applications:
Small motors Coils Transformers Washers and dryers Dishwashers Automotive accessory motors PC boards Battery charges ………and more.Specifications:
Contact capacity |
125Vac/8A, 250Vac/5A, 24Vdc/8A |
Cycles life |
6,000 cycles |
Open temperature |
50°C to 130°C in increments of 5°C |
Temperature Tolerance |
±5°C |
Differential Temperature |
depending on open temperature |
Seal |
Epoxy resin |
Contact resistance |
≤50 m |
Insulation resistance |
The resistance between the leads and insulation sleeve is >100 M with 500 VDC at 25 °C. |
Lead wire pull strength |
30 N applied from lead to lead for 5sec. No slip-off or rupture |
Competitive Advantage:
1. The strongest Chinese manufacturer, ISO 9001and ISO14001 recognized. |
2. Compact, miniature size. |
3.UL,VDE,CE CQC Approved. |
4. Individually temperature checked on modern, custom-designed equipments from Japan. |
5. Snap–action disc, normally on. |
6. Epoxy resin |
7. bimetal discs carry circuit current, so it is current and temperature double sensitivity for maximum design flexibility and application |
Standard lead wire: UL3266 22# 70-100mm
(customer-designed cable are also available)
Model |
L |
W |
H |
BR-B2D |
15 |
7.3 |
3.9 |
BR-B2D and BR-B3D with the same inner assembly and protection funtion, just different plastic PTC housing size.