Delivery Time:3-10 days on order
Certification:UL VDE CE

Self-Hold 17AM manual reset Garden toolings and vacuum cleaner Motor Thermal Protector

Description:

Self-Hold 17AM-D+PTC thermal protector combines the protection of a 17AM-D with a self-holding feature. Designed to prevent overheating in motors, the Self-Hold 17AM offers the best attributes of one shot protectors and auto reset protectors in a single package. The Self-Hold 17AM-D, once activated in a fault condition, maintains its open state until power is removed. No reset button remove power and the device will cool and reset. This inherent design feature adds an extra level of security over automatic reset devices of any type. It is the reliable, cost effective solution for numerous applications.

How the Self-Hold 17AM-D functions?

The PTC Heater is electrically located across the contacts of the protector. When the protector contacts are open, the heater is in series with the load. The heater then maintains the temperature sensitive bimetal of the protector in an open state. To reset the Self-Hold 17AM-D, power must be removed for sufficient time to allow the Self-Hold 17AM-D to cool to below the protector’s reset point.

Specifications

Normally close, open on temperature rise, self-hold, manual reset
Contact capacity	125Vac/16A, 250Vac/8A 600Vac/4A  24Vdc/20A
Cycles life	6,000-10,000cycles
Open temperature	50°C to 160°C in increments of 5°C
Temperature Tolerance	±5°C
Differential Temperature	depending on open temperature
Seal	High-seal and low-seal gasket material available
Contact resistance	≤50 mW
Insulation resistance	The resistance between the leads and insulation sleeve is >100 M with 500 VDC at 25 °C.

Applications:

Vacuum cleaner Garden toolings Bean milk machines Welder Medical equipment Household appliance Actually, it can be used anywhere an auto reset and/or a one shot protector is used!

Competitive Advantage

1. The strongest Chinese manufacturer, TS16949 and ISO14001 recognized.

2. Compact, miniature size.

3. UL,VDE,CE CQC Approved.

4. Individually temperature checked on modern, custom-designed equipments from Japan.

5. Snap–action disc

6. Gasketed steel case suitable for most impregnation processes

7. Professional solutions with wide selection of leads and insulating sleeves

8. Bimetal discs carry circuit current, so it is current and temperature double sensitivity for maximum design flexibility and application

insulation sleeve 17AM-D thermal protection Spring piece PTC Lead wire (customized lead wire is available) lead wire  (customized lead wire is available