Appliance:

Vertical impact crusher is also known as sand making machine is applied widely for the powder process of mineral product including mental and non-metal ore, fireproof material, bauxite, diamond dust, glass raw materials, architectural materials, artificial sand and all kinds of metal ore materials, especially which has more advantages than any other machines in processing the more and most hard materials.

Features and Benefits:

1.High efficiency and low consumption
2.Primary and second crushing capacity
3.More and most hard materials can be crushed
4.Cubic shaped final product
5.Little noise and dust pollution
6.Convenient performance, maintenance, installation
7.Simple structure, low production cost.

Working Principle:

Vertical impact crusher includes hopper, classifier, whirl pool cavity, impeller, main bearing assembly base, transmission device and motor etc.

Operating principle is as follows: the materials enter the crusher through feeder hopper, which is divided into two parts, one part through the middle of classifier entering into the rotating impeller at high speed, then accelerated, whose speed can reach hundreds of acceleration, then is shot through the tunnels around the impeller by the speed of 60-75 meter/second. First the materials will impact with some materials fallen around classifier, then impact on the whirlpool cavity’s scale board together, then will be rebounded and impact on the top of the whirlpool cavity, then changes its direction and goes down, forms continual material layers with the materials shot from the impeller. Therefore some materials will be impacted, crusher, milled twice or more times in the whirlpool cavity, then crushed materials will be excluded through the bottom discharging hole. This can from a closed circulation through the circular classifier system; in general, materials can be crushed into 20 mesh through thrice circulation. Airflow self-circulation in the whirlpool cavity can eliminate the dust pollution well.

Technical Parameters:

Model

Max feeding size(mm) Motor power(KW) Rotating speed(r/min) Capacity (t/h) Whole dimensions(mm) Weight including motor(t)

35

2000-3000

2500×Ф1600×2260

PCL-750

75-90

25-55

7.3

50	1200-2000	3900×Ф2160×2770	PCL-1050	180-220	100-160	16.9
60	850-1450	5600×Ф2950×4000	PCL-1350	320-440	200-360	26.0