Delivery Time:7-25 days
Certification:SGS/ROSH/PONY/ISO9001/ISO14001/ISO1694

R134a Pure gas cooling agent R134a refrigerant 30 lb Air Conditioning and Heat Pumps

Specifications:

Physical properties
Molecular formula	CH2FCF3
Mmolecular weight	102.03
Boiling point 101.3KPa(℃)	-26.10
Freezing point 101.3KPa (℃)	-96.60
Density 30℃(kg/m3)	1188.10
Critical temperature (℃)	101.10
Critical pressure (MPa)	4.06
ODP	0.000
GWP	1300.00

Quality index
Purity	≧99.90%
Water content	≦0.001%
Acidity	≦0.0001%
Evaporation residue	≦0.01%
Chloride content	—
Appearance	Colorless and clear
Odor	Odorless

Description:

Replaces CFC-12 in auto air conditioning and in residential, commercial and industrial refrigeration systems. New equipment.

Commercial Refrigeration: Performs well in small hermetic systems. Centrifugal Chiller Refrigerants: Used in many new chiller designs. Air Conditioning and Heat Pumps: Used in large screw chillers. EPA SNAP Approved. UL Listed.

When retrofitting R-12 systems to R-134a, it is necessary to replace the existing lubricant with POE oil, except in some automotive retrofit applications, which require PAG oil. In most cases, the mineral oil or alkylbenzene oil levels must be reduced below 5% of the new POE charge. Check with OEMs for any specific recommendations regarding oils or procedures. Remove as much of the existing lubricant as possible, add POE, and run the system on R-12 for some time. When the residual oil concentration is appropriate, remove R-12, replace the filter-drier, and charge R-134a.

Applications: HFC-134a is used as refrigerant in automobile air-conditioning, household and commercial refrigerant applications. It can also be used as aerosol, flame retardan, and blowing agent in pharmaceutical, agro-chemical, cosmetics and cleaning sectors.