hydraulic induction heating steel elbow pushing machine

The Main Technical Parameters of The Machine

1  The oil cylinder: Ф 300mm, the effective trip: 6.5m,  pressure:21Mpa,  4 bars

The maximum thrust of the 4 cylinders: 600 tons;   The forward speed: 0—90cm/min ,

The max backward speed: 350cm/min.

2  The pump station:

63scy-plunger pump :3 sets, 18.5KW  Motor:  3 sets (the main working pump)

CB-120 gear pump: 1 set, 15KW motor: 1set (for fast forward and back)

CB-16 gear pump: 1 set,5.5KW motor: 1set (for the fork gate)

The hydraulic valve is integrated oil rout, hydraulic front and back gate. Automatic feeding.

3.  The frame for the main engine: 30# channel steel, welded  with 43kg steel   rail

4  The panel for the main engine: welded with 50mm medium plate

5  Distribution cabinets, operation box 1 set

6  Intermediate-frequency power (power600KW  380v,220v,50Hz)

7  the max pipe can be feed each time : 2 pieces

The scope of supply

A. frame for the main engine: 1 piece, hydraulic pump station: 1 set,

distribution box 1set, front and back fork door: 1 block each .

B.        Intermediate-frequency electric ark:1 piece,  reactor, capacitor: 1 set, 

C.        water cable: 2 (L=2500mm)  Ф920 heating induction coil:1 piece